National Library of Finland
Open Data and Linked Data Service
Search works, persons, organizations and subjects:
Acta polytechnica Scandinavica, Physics including nucleonics series
URI:
http://urn.fi/URN:NBN:fi:bib:me:W00067462200
contributor
Suomen teknillisten tieteiden akatemia
Teknillisten tieteiden akatemia
hasPart
1st International Symposium on Atomic Layer Epitaxy
5th International Workshop on Electroluminescence
A borehole susceptimeter
A calculable impulse voltage calibrator
A calculable impulse voltage calibrator
A channel state feedback communication system
A class of randomly organized associative memories
A conceptual modelling approach to product families and their evolution
A constructive method for the architectural design and correctness verification of real-time programs
A contactless tension profile meter
A continuum representation of stagewise separation processes
A design language for a self-planning system : a procedural development study based on practical experiments with small-group housing
A device for practical determination of the free water content of snow
A double bundle nuclear demagnetization refrigerator for cooling 3He
A double-crystal soft X-ray spectrometer
A dynamic model for breaking pattern of level ice by conical structures
A framework for coordination in distributed production management
A framework for customer oriented business process modelling
A framework method for stretched plates
A fuzzy method for multicriteria decision making
A gridwork method for plates in bending
A low-frequency aeroelastic element method and its application to the harmonic gust response analysis of a flexible airplane
A mass transfer and axial dispersion model for washing of porous beds during compression
A mathematical model for two-phase flow
A method based on probability of adding the individual modes of thermal vibration and predicting their effect on the strength of aluminium crystals
A method defining product dependability requirements and specifying input data to facilitate simulation of dependability
A method for construction of the solution of ordinary differential equations with the aid of the complex plane
A method for the direct burning of black liquor to white liquor in the sulphate process
A method for the prediction of the capillary thermal gradient coefficient in wetted porous materials
A method for the prediction of the evaporation thermal gradient coefficient in wetted porous materials
A method for three-dimensional modelling of buildings from digital aerial imagery
A method of calculating the non-linear deformation forces in a solid from the atomic heat, the thermal expansion and the moduli of elasticity and rigidity by considering the thermal vibration energy
A microcomputer-based instrument for the determination of magnetic content in small-sized samples
A microprogrammable character generator for a CRT phototypesetting system
A model for electric power capacity expansion planning under uncertain conditions
A model for the dynamic planning of industrial projects
A modelling of unsteady air flow in the resonance charging system of high speed diesel engines
A modification of the ion characteristic to the glass theory and the glasses coloured with lanthanons
A new instrument for determination of magnetite content of powdered samples
A new synthesis method for branch-guide directional couplers
A new way to utilize low temperature thermal energy for the production of mechanical energy
A non-contacting method for measuring sheet grammage and thickness using acoustic pulse techniques
A non-destructive electromagnetic method for structural studies of ferrous alloys
A numerical method for calculating critical speeds of rotating shafts
A perturbation solution of the deceleration trajectory in ballistic re-entry
A photocopy control unit for a CRT phototypesetting system
A physico-chemical reactor calculation by successive stationary states
A practical method for calculation of the heat losses into the ground from buildings erected immediately on the ground
A problem on heat conduction in parallel slabs solved by numerical inverse Laplace transform
A pulsating ship screw propeller operating in homogeneous water flow
A random search algorithm for constrained global optimization
A scanning tunneling microscope constructed for studies of LB films, organic and biological macromolecules
A short-cut method to calculate multicomponent distillation
A statistical determination method of cylinder combustion conditions using the cyclic variations of some measurable engine variables
A strategic framework for business impact analysis and its usage in new product development
A study of curved thin-walled girders
A study of dynamic and control properties of industrial flotation processes
A study of dynamics and control properties of industrial flotation processes
A study of EMI-endurance of two polling-type local area networks used in real-time automation applications in a simulated electrical environment
A study of lignanolytic soil bacteria with special reference to [alpha]-conindendrin decomposition
A study of self-diffusion in a binary electrolyte-water system
A study of the kinetics of the hydrogenation of cottonseed oil in a semi-batch slurry reactor
A study of the quantum efficiency of X-ray radiation absorbed in a p-n junction
A study of the relationship between apparent and petrophysical spectral IP response by numerical modeling
A study on the dielectric constant and resistivity of amorphous, polycrystalline and monocrystalline selenium at 24 GHz
A supply decision procedure for the distribution of magazines
A systems engineering approach to biotechnical processes : experiences of modelling, estimation and control methods
A theoretical analysis of a new process for liquefaction of gases
A theoretical and experimental study of quenched domain oscillations in a transferred electron device
A theoretical study of absorption and axial dispersion in filter cake washing
A theory for optimal Pl-control of multivariable linear systems
A thermodynamic analysis of the system Fe-Cr-Ni-C-O
A thermodynamic assessment of the Cu-O-CaO-SiO₂ system
A transient heat conduction problem in a solid with temperature-dependent thermal properties
A transistorized anticoincidence analyser for radiocarbon dating
A type-oriented approach to knowledge-based systems
A vibrator probe for planting position sensing for a tree planting machine
Absorption of ferric iron in reduced soda-silica glasses containing chalcogenides
Actortools : tools for user interface modeling, development and analysis
Actuation redundancy in a closed-chain robot mechanism
Adaptation of a linear system to a finite set of patterns occurring in an arbitrarily varying order
Adaptation of neural network and fuzzy logic for the wet-end-control and process management of paper or board machines : a tool-making approach
Adaptive methods for on-line recognition of isolated handwritten characters
Adaptive rainfall-runoff model, SATT-I
Added resistance and unsteady bow wave field of a ship in short waves
Adsorption into a porous sphere
Advanced Summer School on Microelectronics: Physics and Technology for VLSI : proceedings of the Advanced Summer School on Microelectronics: Physics and Technology for VLSI, Kivenlahti, Espoo, Finland, June 8-12, 1987
Advanced Summer School on Microelectronics: Progress in Sensor Technology : proceedings of the Advanced Summer School on Microelectronics: Progress in Sensor Technology, Kivenlahti, Espoo, Finland, June 14-17, 1988
Akateemikko Pekka Jauhon 70-vuotisjuhlakirja 27.4.1993 : Publication in honour of academician Pekka Jauho on his 70th birthday, April 27th, 1993
Algebraic theory for ordinary linear time-invariant difference systems
An accurate and fast method for approximating step and impulse responses
An algebraic theory for analysis and synthesis of time-varying linear differential systems
An analogue image processing system using television camera and monitor with multiple frame interlacing
An analysis of heat- and moisture movement in soils in the vicinity of ground heat collectors for use in heat pump systems
An analysis of the electromagnetic absorption spectrum of water at the wavelength range between 0,5 um and 10 um
An analysis of the modulated frequency stabilizer and of the absorption detector for microwave reaction cavity measuring systems using a new diode model
An analytic study of the throttling control methods of liquid-cooled rotary screw air compressors, with a view to minimizing energy demand
An analytical formulation for the life of rolling bearings
An apparatus for determination of the B[sup 10] isotope content
An apparatus for the measurement of friction on ice and snow
An application of integral transformations and the Wiener-Hopf technique to the supersonic flow past on oscillating, nearly circular, slender body and past an elastic, two-dimensional, thin wing
An approach to hierarchical information processes with an application to speech synthesis by rule
An approach to knowledge representation and reasoning for product configuration tasks
An approximate method for the prediction of the effective thermal conductivity of wetted porous materials
An electroluminescent display simulation system and its application for developing grey scale driving methods
An electron gun for Auger and ultrasoft X-ray apparatus
An evolutionary approach for locating economic facilities
An experimental device for measuring friction between ski and snow
An imaging apparatus based on ultrasonic holography
An investigation of the K[sup 39] (p, [gamma]) Ca[sup 40] reaction at proton energies 1103 keV, 1131 keV and 1153 keV
An iterative technique for analysis of nearly or completely incompressible solids
An object-oriented mathematical modelling system
Analysis of different energy scales in chemical thermodynamics and estimation of free energy and enthalpy changes for half cell reactions
Analysis of induction motors based on the numerical solution of the magnetic field and circuit equations
Analysis of joint distribution of number of cycles and residence time in a selective recycle system
Analysis of selective recycle systems
Applicability of kraft cooking control models
Applicability of vector potentials in the finite element solution of three-dimensional eddy current problems
Application of a film model to the multicomponent mass transfer of ions into kraft pulp fibers
Application of a model reference adaptive technique to the identification and control of Wiener type nonlinear processes
Application of fuzzy methods to process safety control and to accident analysis
Application of group theory to trigonal selenium for OPW-calculations
Application of internal friction method for studying point defect behavior in engineering materials
Application of parameter adaptive approach to servo control of a hydraulic manipulator
Application of population balances in steady-state and dynamic studies of two particulate processes: crystallization and emulsion polymerization
Application of swirling jets to mixing of stratified liquid layers
Applying adaptive techniques and operations research methods to the resource management in telecommunications
Approximate gamma ray flux calculations outside a reactor core
Asymmetric chaotic swinging and its universality
Attribute trees as adaptive object models in image analysis
Austenitzerfall eines 0.18%C-2% Mo-Stahles im Temperaturbereich der Perlitstufe
Automation in photogrammetric block adjustment systems : on the role of heuristic information and methods
Back-reflection of neutrons from mosaic crystals
Basis representations in large-scale linear programming software
Bayesian ensemble learning for nonlinear factor analysis
Bending of parallelogram plates
Bicriterion optimum design method for elastic trusses
Biotechnical production of itaconic acid by immobilized Aspergillus terreus
Blast vibration : threshold values and vibration control
Blends of thermotropic main-chain liquid crystalline polymers and thermoplastics
Boundary element analysis for dynamic loading of a circular plate on an elastic medium
Boundary element method for three-dimensional magnetostatic fields in terms of vector variables
Breakdown phenomena in rf sputtering discharges
Broadband electromagnetic measurements over conductive orebodies and their interpretation with heterogeneous plate models
Bubble bursting phenomena on the free surface on iron melt and at the slag/iron interface
Calculation methods for determining the pressure loss of two-phase pipe flow and ejectors in pneumatic conveying systems
Calculation of multicomponent mass transfer between dispersed and continuous phases
Calculation of process variables in slurry-type coordination polymerization reactors
Calculation of staged cascades using reference concentrations
Capacitive ultrasonic transducers : their parameters and testing
Capillary pressure as a function of moisture content in porous materials
Case-based reasoning in knowledge-based CAAD : modelling case representation for architectural design reuse
Chaotic motion of a classical anharmonic oscillator
Characteristics of long chain branching in ethene polymerization with single site catalysts
Characterization and mechanisms of changes in wood pulp fibres caused by water removal
Characterization and properties of mechanical pulp fines
Characterization of overlayers in nanometric scale : case studies of TiO[sub 2] materials
Classical doubly anharmonic oscillator
Cochannel interference cancellation in the GSM system
Coevolutionary approach for implementing organizational change : case study on a business process change in a large organization
Combating frequency errors in OFDM systems by applying signal coding in frequency domain
Combination of two-dimensional finite element analysis of electrical machines with circuit simulation techniques
Combinatorial problems in the theory of ladder networks
Comparing different control strategies of hydrostatic transmission system
Comparison of logic function realization methods
Comparison of QRA and vulnerability analysis : does analysis lead to more robust and resilient systems?
Computation of the steady-state solution of nonlinear circuits with time-domain and large-signal-small-signal analysis methods
Computational analysis of realistic scalar optical fiber models
Computational fluid dynamics aided combustion analysis
Computational methods for distillation design
Computational methods for hadronic cascades, gamma spectroscopy and activation detectors
Computational topology : a study of topological manipulations and interrogations in computer graphics and geometric modeling
Computer aided process equipment selection and design using knowledge engineering techniques
Computer simulation of gas flow and heat transfer in waste-heat boilers of the Outokumpu copper flash smelting process
Computing multicomponent distillation
Concentration and purification by crystallization
Concepts and an implementation for product data management
Condensation of [delta]-hydroxyvaleraldehyde with formaldehyde : 1, Preparation of 2,2-bishydrodxylmethyl-1,5-pentandiol
Condensation of [delta]-hydroxyvaleraldehyde with formaldehyde : 2, 3,3-bishydroxymethyltetrahydropyran-2-ol
Confocal laser scanning microscope : a pre-defocus imaging mode, sample aberration and applications
Construction and operation of a nuclear refrigeration cryostat
Construction and performance of a cold neutron source
Construction of a rotating coil magnetometer
Construction of demagnetizing coils for beneficiation processes
Contact angle measurements of protein adsorption onto membrane polymer films
Contact mechanical model for winding nip
Continuous crystallization in imperfectly mixed suspensions
Contributions to a 3-D robot vision system : grouping from sparse and incomplete data
Contributions to the theory of discontinous precipitation
Corridor analysis and forecasting of intermodal transportation systems between Finland and Eastern European countries
Countercurrent electrolysis in a thin porous membrane
Crack initiation criteria in combined modes of loading
Critical speed of shafts with elastic clamping moment at the bearings
Cross section design of residential streets based on meetings between motor vehicles
Crystallization design chart and computer algorithm
Customer orientation and competence building
Customizing news content for individuals and communities
Data exploration process based on the self-organizing map
Data exploration using self-organizing maps
Decision directed diversity combiners for digital radio links
Degradable lactic acid polymers modified by copolymerization and blending : mechanical properties
Dependence, social capital, and learning in key customer relationships : effects on the performance of technology-based new firms
Design and voltage supply of high-speed induction machines
Design aspects of massive iron rotor equipped with a sandwiched squirrel-cage pertaining to polyphase induction motors
Design of a combined UHV-atmospheric pressure apparatus for catalytic surface studies
Design: ecology, aesthetics, ethics : selected and edited papers from DEcon'93 symposium
Design: emergence, content : selected and edited papers from DEcon'95 symposium
Design: evolution, cognition : selected and edited papers from DEcon'94 symposium
Desulphurization by limestone injection at high temperature
Determination by the open-end capillary method of the diffusion coefficient of tracers in electrolytic solutions
Determination of areal snow water equivalent using satellite images and gamma ray spectrometry
Determination of particle flux spectra with multireaction activation detectors
Determination of peak shapes of filtered X-rays using attenuation measurements with polydiscrete X-ray beams
Determination of the thermodynamic dissociation constant of weak acids in aqueous solutions by means of formulas for ionic activity coefficients
Deterministic filtering algorithms for non-linear differential systems
Developing demand chain management : case study on the fast growing cellular networks industry
Development of a self-consistent high altitude EMP code
Development of a spark assisted direct injection multifuel diesel engine especially for alcohol fuels
Development of the theory and design of saturable reactors for power systems
Developments in turbulence modelling with Reynolds-averaged Navier-Stokes equations
Dextran modifications of polysulfone UF-membranes : streaming potential and BSA fouling characteristics
Die Eigenspannungen in den aufgekohlten Schichten bei einem unlegierten und einem Mo-Cr-legierten Einsatzstahl nach verschiedenen Wärmebehandlungen
Die Ermüdungsfestigkeit des Schweissmetalls
Die korrosionsbedingten Ermüdungsbrüche der Pleuelstangen bei Gattersägen
Dielectric properties and passive remote sensing of low-salinity sea ice at UHF frequencies
Diffusion of impurities and vacancies in compound semiconductors
Diffusion of impurities and vacancies in compound semiconductors
Diffusion of impurities in compound semiconductors and diamond-like carbon films
Direct observations of the nucleation and nucleus growth of cobalt on cobalt monoxide
Directly driven, low-speed permanent-magnet generators for wind power applications
Discrimination and characterization of biological tissues with magnetic resonance imaging : a study on methods for T1, T2, T1[rho] and chemical shift imaging
Disintegration of technological competencies : an empirical study of divestments through spin-off arrangements
Distributed parallel processing for photogrammetry and image processing
Domain modelling for technical documentation retrieval
Drag analysis of athletes using wind tunnel tests
Drop size distributions in liquid sprays
Dry magnetic separation of finely ground magnetite in a rotating magnetic field
Drying of water-borne coatings
Dynamic macro topography of large slowly rotating cylinders
Dynamic model systems and time optimal position control of the induction machine
Dynamics and stability of an MSMPR-crystallizer with fines dissolving
Earthquake induced response of aseismically isolated bridges : a simplified stochastic approach
Eco-efficiency in the Finnish and Swedish pulp and paper industry
Effect of lubricant on the wear of prosthetic joint materials
Effect of nitrogen content on precipitation behaviour and properties of P/M high nitrogen austenitic stainless steels
Effect of roasting on amblygonite and its dissolubility
Effect of shearing force on the deflection of a beam of finite length on an elastic foundation
Effect of solids circulation on bubble parameters in a freely-bubbling fluidized bed
Effect of some fabric treatments of the properties of cotton and rayon fibres
Effect of stress on martensitic transformation at low temperatures
Effects of continuous addition of lubricating oil additives upon the performance and wear of a high-speed diesel engine in severe working conditions
Effects of post-irradiation thermal annealing on radiation embrittlement behaviour of Cr-Mo-V alloyed weld metals
Effects of temperature on mechanical properties of austenitic high nitrogen steels
Efficiencies in distillation and reactive distillation
Efficient access methods for multiservices mobile networks
Efficient transitive closure computation in large digraphs
Efficient use of the equivalent layer concept in planning induced transmission filters
Eigenfunctionals of the one-dimensional transport operator in modal approximations
Eigenfunctionals of the one-dimensional transport operator in modal approximations
Eine einfache halbgraphische Methode für die Formulierung der Funktion Ne = f (Re) in der Rührtechnik aus dem bekannten Graph
Eine Modifikation der offenen Kapillarenmethode nach Thomas zur Bestimmung des Tracerdiffusionskoeffizienten in wässrigen Elektrolytlösungen
Einfluss des Kriechens und Schwindens auf die Moment-Krümmungs-Beziehung des Stahlbetons - insbesondere im gerissenen Zustand
Electrical characterization of conducting polymers and polymeric semiconductor devices
Electrical conduction and switching in chalcogenide thin films
Electro-optical studies of semiconductor compounds for electroluminescent and laser devices
Electrode kinetics and species transport in direct oxidation methanol fuel cells
Electroluminescence in ZnS:Mn thin film structures grown with atomic layer epitaxy
Electrolytic polishing of copper
Electromagnetic field of an oscillating point dipole in the presence of spherical interfaces
Electromagnetic scattering from a inhomogeneity in a half space by the method of successive reflections
Electromagnetic scattering from a plate-like, non-uniform conductor
Electromechanical properties of radial active magnetic bearings
Electronic structure of anisotropic semiconductors : optical properties and behaviour under hydrostatic pressure
Electronic transport and optical properties in conducting polymers : polyalkylthiophenes and polyphenylenevinylene
Elimination of the influence of stray capacitances in measurement of the mercury interface capacity
EM studies of the morphology of rigid PVC resins
Emergence, complexity, hierarchy, organization : additional papers from ECHO III Conference : Vol. 2
Emergence, complexity, hierarchy, organization : selected and edited papers from ECHO III Conference
Energy loss interactions of ions in semiconductor materials as studied by ion beam techniques
Energy-dependent neutron transport in two adjacent media : 1
Energy-dependent neutron transport in two adjacent media : 2
Engineering cost functions in make-to-order production with applications
Enhancement of the boiler design process by the use of expert system technology
Environmental adaptive benchmarking : a framework for environmental assessment
Equilibrium and kinetic studies on etherification : reactions of C[sub 5] and C[sub 6] alkenes with methanol and ethanol
Equipment for the continuous recording of internal friction at low frequencies and constant amplitude
Error characteristics and simulation of error control with quality criterion in 9600 bit/s public switched telephone channels for digital group 3 facsimile
Etch pit observations in trigonal selenium single crystals
Evolution of engine : hydraulic free piston engine
Exact image principle in electromagnetic field computation
Exact solution in the 2-dimensional case for the anisotropicbeam
Excited states of Pt[sup 192]
Expedient total productivity measurement
Experimental and modeling study on smelting reduction process
Experimental and theoretical study of the effect of a new dryer construction on paper machine runnability
Experimental investigations and computational fracture mechanics modelling of brittle ice fragmentation
Experimental studies of tetrahedral amorphous carbon coatings
Experimental studies on cooled millimeter wave mixers
Experimental study of electronic stopping powers for heavy ions
Experiments in the preparation of ion exchange membranes for electrodialysis
Experiments in the synthesis of anion and cation exchangers
Fabrication of mesoscopic semiconductor structures
Factors affecting low-intensity wet magnetic separation
Fast photothermal techniques in nondestructive evaluation
Fast training of a high-speed voiceband data modem receiver
Fatigue of copper crystals under reversed constant loading
Fatigue studies as a statistical work-hardening phenomenon
Feasibility of impulse voltage puncture test on insulators in air
Ferromagnetic hysteresis in finite element computation of magnetic fields
Fifty years of physical chemistry and electrochemistry at Helsinki University of Technology
Finite element model for elastic rotating shaft
Finite element solution of the multigroup transport equation in two-dimensional geometries
First principles calculations for defects in semiconductors
Fluorescence of sputtered metal atoms and filling gas atoms in argon and neon rf sputtering glow discharges
Force and slip behaviour in V-belt drives
Form-based approach to distributed cooperative work
Formation and separation of molten phases in copper smelting
Fracture morphology of rigid polyvinyl chloride : 2
Fracture toughness at high loading rates
Free flight and re-entry of a missile with a high ballistic coefficient
Frequency-domain approach for calculating wind-induced vibration and aeroelastic stability characteristics of long-span bridges
Fundamental rheological properties and tack of printing inks and their influence on ink behaviour in a printing nip
Fundamentals of safety-conscious computer-aided process design
Fur testing methods : results for mink
Fuzzy methods to compensate missing data and to evaluate the relative importance of different contributors in accident analysis
Fuzzy state controller with reference to a hydraulic position servo
Gamma-gamma directional correlations of Ce[sup 140]
Gamma-gamma directional correlations of Ce[sup 140]
Generation of an axisymmetric cylindrical shell element using a shooting method
Generation of an axisymmetric ring plate element using a shooting method
Generation of wind tunnel flow with independently varying turbulency level and velocity profiles
Geometric mine modeling : modeling of three-dimensional objects based on incomplete information
Global growth strategies for high technology challengers
Graphic evaluation of orebodies
Group theoretical analysis of trigonal selenium energy bands
Heat balance reaction calorimetry and its applications in ethylene polymerizations
Heat transfer and hydrodynamics of falling liquid films
Heat transfer and solidification in copper and brass upcasting
Heat transfer in unidirectional regenerators
Heat transfer problems in underground spaces
Heat-treatment of controlled-transformation steels
Helsinki International Summer School on Semiconductors 1982 : proceedings of Helsinki International Summer School on Semiconductors, Espoo, Finland, 14-18 June 1982
Higher modes of critical speed of shafts with elastic bearing moments
Homogeneous nucleation in a laminar flow diffusion chamber
Hydraulic bulge device for sheet metal testing
Hydraulic filter performance under variable flow conditions
Hydrodynamics of low-flux and high-flux circulating fluidized beds
Ice detection using surface acoustic wa[v]es
Ice edge contact : a brittle failure process model
Identification of intrinsic point defects in gallium arsenide by combining positron annihilation and optical spectroscopies
Image Science '85 : proceedings of Image Science '85 Helsinki, Finland, 11-14 June 1985 : Volume 1
Image Science '85 : proceedings of Image Science '85 Helsinki, Finland, 11-14 June 1985 : Volume 2
Image segmentation by contour grouping : knowledge based search in attributed proximity graph
Implementation of mine automation : the importance of work safety and motivation
Implementing organizational and operational change : critical success factors of change management
Improving the quality of crushed rock aggregate
Improving the speed and convergence of DC analysis by means of self-generating lookup tables and Piecewise-Linear analysis
In vitro characterization of bioresorbable polymers and composites for drug delivery and bone replacement
In-situ measurement and compensation control in external grinding of large cylinders
Incremental feature modelling : methodology for integrating features and solid models
Independent component analysis : a neural network approach
Independent component approach to the analysis of EEG and MEG signals
Influence of the number of sparks/cycle and spark duration on the performance of a spark assisted diesel engine
Influence of the standard single mode fibre bends on cable properties investigated by the [alpha]11[sub b]([lambda]) method
Infrared line-scanning technique for thermal nondestructive testing of carbon fiber reinforced composites
Infrared spectra of carboxylic acid derivatives 6 : equivalent weight determination : on quantitative aspects of the pressed halide disc technique
Integrated processing and utilization of community and industrial solid wastes
Integration mechanism in new product development
Intelligent assistance to the fermentation operation
Intelligent multivariate process supervision
Interaction of the positron and the positronium atom with insulating fluids and solids
Interactive inversion algorithm and apparent resistivity versus depth (ARD) plot in multifrequency depth soundings
Internal pair formation of the 1835 keV gamma ray in [sup 88]Sr : Radiative widths for dipole and quadrupole transitions in 20<A<40 nuclei
International growth of young technology-based Finnish companies
Introduction of the principle of virtual images in associative memories
Investigation of the electrochemical processes in sulfide flotation
Investigations of radio reflections from stellite-produced ion trails using 100Mc CW radar
Ion characteristics : a new way of assessing the chemical properties of ions
Ion-backscattering analysis of electronic materials
Ionization of the atmosphere and attenuation of radar waves after a nuclear explosion
Isothermic curved surfaces in thermography
Justina, a platform for autonomous land vehicle research and development
Kinetic friction between ski and snow
Kinetic study on solid state and smelting reduction of chromite ore
Kinetics and mechanism of sulphation of cobalt and nickel oxides
Knowledge-based systems in architecture : selected and edited papers from the TIPS'88 conference
Lactic acid based poly(ester-urethane) -modification via copolymerization, chain linking and blending
Laminar vortex flow in straight channel
Large displacement and stability analysis of shallow axisymmetric shells assuming linear viscoelastic material
Large scale model for turbulent flow in smooth circular pipes
Lateral buckling of thin-walled curved beams beyond the limit of proportionality
Lessons from nature : the behaviour of technical and natural barriers in the geological disposal of spent nuclear fuel
Liquid circulation in stirred tanks
Liquidus equilibria and solution thermodynamics in copper-rich copper-nickel-oxygen alloys
Loading pressures on a concrete pipe in the ground, and loading capacity of a concrete pipe
Local selection environment nurturativeness in determining the fitness of new, technology-based firms : derivation and validation of a model
Localization of plastic flow and ductile fracture in metals
Locus of innovation in the biotechnology industry - determinants and consequences
Low loss photoresist masked silver film ion-exchanged glass optical waveguides
Macro element method for modeling eddy currents in the multi-conductor windings of electrical machines
Magnetic field analysis of electric machines taking ferromagnetic hysteresis into account
Magnetic field analysis of superconducting homopolar machines
Magnetic field in the air-gap and load losses in the solid pole surfaces of synchronous machines
Magnetic filtration of steel mill effluent waters : principles, techniques, and economics
Magnetic resonance imaging at 0.02 T : design and evaluation of radio frequency coils with wave finding
Magnetic shape memory (MSM) effect in Ni-Mn-Ga alloy
Management of enterprise evolution : evolution management principles and methods for learning organizations
Management of tacit knowledge in a project work context
Mass transfer and particle interactions in granular systems and suspension flows
Matching and modeling of multiple 3-D disparity and profile maps
Material quantity and cost estimation models for the design of highway bridges
Mathematical model for continuous emulsion polymerization of vinyl chloride and its steady-state solution
Mathematical model for drying of adsorptive porous materials
Mathematical simulation of interdendritic solidification of low-alloyed and stainless steels
Mean activity coefficients of several uni-univalent electrolytes in dilute aqueous solutions at 298.15 K
Measurement of the cross section of cadmium for neutrons in the 10[mu]eV range
Measurement of the graphic properties of roentgenographic apparatuses
Measurements of space charge limited currents in hexagonal selenium single crystals
Measuring permanent magnet materials by Yoke methods
Mechanics and thermodynamics of drying
Metadata enhanced content management in media companies
Metal-ceramic interaction studies utilising the diffusion couple method
Metallocene catalyzed copolymerization of olefins with functional monomers
Metallocene-catalyzed ethene polymerization : long-chain branched polyethene
Methodological and structural principles for flexible geometric modelling in computer aided design
Methodology for modelling complete product assemblies
Methods for combining a theoretical and an empirical approach in modelling pressure and flow control valves for CAE-programs for fluid power circuits
Methods for computer-aided design of free-form objects
Methods for optimal spatial control of pressurized water reactors
Methods for reduction of phase shift artifacts in gradient echo magnetic resonance imaging
Methods of calculating the magnetic forces for vibration and noise analysis in electrical machines
Methods to balance the kraft pulp mill
Microwave line-of-sight channel measurements, channel modelling, and application of channel models to digital radio performance prediction
Mixing power for self-aerating impellers
Model studies on spectral induced polarization
Modeling and simulation of ultrafiltration and reverse osmosis processes
Modeling concept for intensive reacting submerged gas injection a case study of a Peirce-Smith converter
Modeling of high-speed and high-power semiconductor devices
Modeling of mass transfer phenomena in pulp-water suspensions
Modelling and simulation of catalytic autothermic gas reactors
Modelling and simulation utilized in research and development of mobile hydraulics
Modelling of hydrostatic transmission : steady state, linear and non-linear models
Modelling of ozonation and advanced oxidation of organic impurities in aqueous solutions
Modelling skewed rotor slots within two-dimensional finite element analysis of induction machines
Modelling, simulation and optimisation of ultrafiltration and reverse osmosis processes
Models and calculation methods for stagewise and differential contact mass transfer equipment
Modern approaches to control of mineral processing
Modern methods for cost estimation and decision-making in preliminary plant design
Modulation of phototransduction in vertebrate photoreceptor cells : roles of SH-groups of the light-sensitive channel and of pH regulating transport mechanisms
Molecular dynamics simulations of atomic collisions for ion irradiation experiments
Molecular structure, crystallization and melting behaviour of fractionated polypropylenes
Monitoring the level of magnetization in AC-yokes by utilizing the twin induction method
Monte Carlo calculations of a hydrogen cold neutron source
Multi-criteria optimization of composite lamination for maximum failure margins with an interactive descent algorithm
Multivariate monitoring of wastewater treatment processes in pulp and paper industry
Multivariate process monitoring of sequential process data : a chemometric approach
Municipal and industrial organic solid waste treatment process
Network capacity and quality of service management in F/TDMA cellular systems
Neutron transport during a nuclear air burst, derived Monte Carlo calculations
New algorithms for network analyzer, test fixture and wafer prober calibration
Non-ohmic effects in hexagonal selenium single crystals
Nondestructive evaluation of coatings by low-frequency thermal waves
Nondestructive thermal testing and characterization of polymers and ceramics using optical beam deflection and infrared detection
Notes on the bending behaviour of slightly curved rotating shafts
Numerical calculation of steady heat transfer from a horizontal cylinder by combined free and forced convection
Numerical modeling of the drying, devolatilization and char conversion process of black liquor droplets
Numerical modelling of strain localization in dense sands
Numerical simulation of hydraulic transients
Numerical treatment of axisymmetrical conduction phase change
Object-oriented approaches applied to GIS development
Observation of high-intensity sound self-defocusing in CdS
Observations on the effects of nonuniformity of flow on resistance coefficient
Of the anodic behaviour of cobalt
Of the capability of component models to predict the response of a fluid power system with a long pipeline and an accumulator
On algebraic methods in systems theory : Ordinary linear time-invariant differential systems
On attenuation and electrical length of a plasma loaded helical transmission line
On automation in precise height determination
On determination of the time-dependent pair correlation function from inelastic scattering measurements of slow neutrons at a fixed angle
On eliminating cutting damage by advanced control of timber cutting process
On improving energy utilization in hydraulic booms
On mode conversion to electrostatic waves in ion cyclotron range radiofrequency heating of fusion plasmas
On modeling of earthquake wave motion and its effects on multi-support pipelines
On multiple scattering by small particles in open resonators
On nonlinear viscoelasticity analysis with application to experiments
On set theoretical foundations of system theory : A study of the state concept
On system development of photogrammetric stations for on-line manufacturing control
On the anodic behaviour of Pb-Ag alloys in sulphuric acid solutions
On the application of perturbation technique to the study of missile flight : With special reference to internal mass flow, thrust malalignments, and the effect of gravity
On the biosynthesis of Dryopteris acylphloroglucinols
On the calculation of activation energy in thermal activation rate processes
On the calculation of current and temperature distributions in a thin conducting strip between magnetic pole faces
On the calculation of the bearing capacity of an eccentrically loaded straight concrete column with a parabola as its stress-strain curve : 2, General formulae for columns with simply, multiply or disconnected symmetrical cross sections, and their application to columns with an elliptical cross section
On the calculation of the bearing capacity of an eccentrically loaded straight concrete column with a parabola as its stress-strain curve : rectangular cross section
On the computation of density functions of parameters in stochastic systems
On the control of manipulator flexible motion by modal-space techniques
On the conversion of digital pattern information into raster scan format using hardware implementation
On the critical speed of a shaft as influenced by the supports
On the critical speed of stepped shafts on multiple elastic supports, carrying disks
On the decay of Hf[sup 177]
On the decomposition of austenite in a 13 per cent chromium steel
On the decomposition of potash felspar
On the derivation of new approximations for the monoenergetic Boltzmann equation using a self-adjoint variational principle
On the design principles of a high intensity separator with permanent magnets
On the detection of the magnetic heart vector : an application of the reciprocity theorem
On the determination of the magnetic dipole and quadrupole moments
On the determination of thermodynamic relationships in steady flow processes
On the development of methods for estimating thermal loading in high-speed diesel engines
On the distribution and direction of contact pressure under a rigid foundation
On the dynamics of a pneumatic flotation cell
On the effect exerted by the stoichiometric defect structure on the reactivity of oxides
On the effect of the structure of the metal and oxide phase on the kinetics and mechanism of the hydrogen reduction of cobalt oxide
On the fatigue strength of a copper coating sprayed on steel bars
On the fields and permanent magnets in magnetic pulleys and separators
On the fluid flow and free surface phenomena in a metallic melt under the influence of rotational electromagnetic stirring
On the formulation of a class of electromagnetic field problems in terms of vector admittance and impedance functions
On the free swirling radial jet
On the gravimetric inversion problem
On the half-plane model in double-dipole electromagnetic prospecting
On the improvement of pressure behavior of hydraulic brake control system
On the influence and use of gamma radiation in reactor noise measurements
On the influence of microstructure on magnetization transitions in steel
On the influence of slight curvature in the bending behaviour of a rotating shaft
On the integral transformation of the linearized perturbation velocity potential
On the interaction between inclusions in steel and the cutting tool during machining
On the inversion problem of magnetic ore prospecting
On the issuing of some statements as a part of regional physical planning in Finland
On the mathematical modelling of microbial age dynamic and some control aspects of microbial growth processes
On the measurement of the hysteresis loop of hard magnetic materials with Hall probes
On the measurement of the magnetic susceptibility on anisotropic materials
On the measurement of the susceptibility and conductivity of the rock surrounding a bore
On the nonlinear behaviour of rotating shafts
On the numerical calculation of the flexural critical speeds of rotating multispan shaft
On the numerical solution of certain boundary value problems and eigenvalue problems of the second and the fourth order with the aid of integral equations
On the passivity of Ni-Cr alloys
On the performance of the DELPHI hadron calorimeter
On the phase stability of parametric amplifiers
On the pore structure and dewatering properties of the pulp fiber cell wall
On the possibilities to increase power output and reduce exhaust emissions of a spark-assisted direct-injection ethanol engine
On the precipitation of ammonium polyvanadate
On the recrystallization of austenite in connection with hot-working in slightly hypoeutectoid carbon steel
On the regularity calculus and its role in distributed programming
On the sintering of W-Ni-Cu heavy metal
On the state of stress and displacement of certain shells of translation
On the statistics of ice loads on ship hull in the Baltic
On the theory of the electron wave tube with elliptic cross section
On the use of SATMAGAN as a Gouy balance and as an instrument for the distinction between the ferromagnetic and paramagnetic susceptibility of minerals
On the variance reduction in Monte Carlo calculations of multiple scattering experiments
On the variance reduction tecniques in Monte Carlo solutions of neutron transport problems
On the water tolerance of certain liquid fuel-alcohol mixtures
On two half-range completeness in the energy-dependent transport theory
Operation of inverter equipment with a DC supply containing low frequency ripple : an analysis of input impedance
Optimal controller design by nonlinear and game theoretic methods
Optimal dolphin soaring as a variational problem
Optimal xenon shutdowns for boron controlled reactors
Optimization of recovery boiler plant air systems by new design method and process integration
Optimization of some components and operational parameters of a turbocharged and intercooled spark-assisted direct-injection ethanol engine
Optimization program for optical systems
Optimum economic dimensioning of an indirect heat-exchanger
OPW energy bands of trigonal selenium
Outdoor navigation of mobile robots
Ownership strategy and competitive advantage
Oxidation of solid particles of synthetic nickel mattes in simulated flash smelting conditions
Oxygen-metal (Ag, Au, Bi, Cu, In, Ni, Sb, Sn, Te) interactions in dilute molten lead alloys
Parameter estimation for the Gummel-Poon transistor model
Parameterized reachability trees for predicate/transition nets
Parametric amplification using a point contact Josephson junction
Participant-contingent design decisions : a theory of novice decisions in home acquisition
Particle diffusion in moderately and highly dense gas-particle flows
Performance characteristics of thermal cycles and energy conversion systems
Performance evaluation and process interventions : a method for business process development
Periodic solutions of an averaged duffing equation
Photo- and biodegradation of high volume thermoplastics
Photoconductivity of hexagonal selenium single crystals
Photogrammetric block adjustment based on singular correlation
Plasma etching in microdevice fabrication : thin film and process integration aspects
Point defect structures in gallium arsenide studied by positron spectroscopies
Polynomial operators for nonlinear systems analysis
Positron annihilation in deformed copper
Positron diffusion and surface interactions in solids
Positron dynamics in solids
Positron experiments on vacancies in irradiated and quenched metals
Positron induced cluster and positronium bubble in low temperature fluids
Positron interactions on solid surfaces and at bilayered structures
Potentiometric determination of total sulphur in white and green liquors using a lead ion-selective electrode and acetone as solvent
Potentiometric titration as a method of determining the stoichiometric dissociation constants of weak acids from the thermodynamic dissociation constants of aqueous solutions at 298.15 K
Precipitation of Cr2N in some nitrogen-alloyed austenitic stainless steels
Prediction of heat transfer coefficient from pressure drop in pipes
Predictions of ice contact forces on a marine screw propeller during the propeller-ice cutting process
Preparation and analysis of thin film electroluminescent devices
Pressure-enduring soft X-ray windows
Prevention of steel melt reoxidation in tundish
Principles of functional gradient materials and their processing by powder metallurgy
Probabilistic assessment of snow loading on flat timber roofs of low-rise buildings
Probabilistic models of early vision
Proceedings of the symposium on characterization of interaction of polymers and colloids with surfaces, 9-10 of June 1997, Lappeenranta, Finland
Proceedings of the Symposium on Crystallization and Precipitation, 12-14 May 1997, Lappeenranta, Finland
Product structure metrics as an indicator of demand-supply chain efficiency : case study in the cellular network industry
Production and properties of Nd-Fe-B permanent magnets
Production control of integrated meat plants
Production, microstructure, and mechanical properties of iron-based composites
Proposals for utilizing theoretical and experimental methods in modelling two-way cartridge valve circuits
Prospects in paper technology
Pulsed neutron measurements in graphite
Pulsed photoacoustics and its nondestructive testing applications
Punch-through controlled surface to increase breakdown voltage of planar p-n junctions
Purification of organic chemicals by zone melting
Qualitative reasoning and optimization of chemical engineering processes
Quality characteristics of fine aggregates and controlling their effects on concrete
Quantity, composition and aerial load of urban runoff water in Finland
Rapid, high resolution X-ray topography with synchrotron radiation
Rates of turbulent transfer to a pipe wall in the mass transfer entry region
Reaction calorimetry in slurry type chain polymerizations
Reactions of Raphia hookeri under some major chemical processes
Reactor irradiation of chalcogenide threshold switches
Realising the potential of traceability : a case study research on usage and impacts of product traceability
Realizing the productivity potential of speed
Receiver structures based on self-organizing maps
Recognition of strings of discrete symbols with special application to isolated word recognition
Reduction of NO[sub x] with NH[sub 3] in presence of pyrolysed macro-cycle catalyst
Refraction in a layered medium with applications to geodesy and to atmospheric acoustics
Reinvestigations of the copper-cadmium alloy system: the alpha phase boundary and the crystal structure of the Cu[sub 2]Cd phase
Rekonstruierbarkeit der elektrischen und magnetischen Permeabilität aus Messwerten
Reliability-based optimization of plant precast concrete building systems
Reluctance network for analysing induction machines
Removal of antimony and arsenic from impure copper concentrates under simulated flash smelting reaction shaft conditions
Replicated computations in a distributed switching environment
Research and development cooperation and technology transfer as strategic instruments : a general assessment and a case study of simulation software development
Review on Ni- and Co-base composite materials for the temperature range of 1000 ̊... 1100 ̊
Rf sputtering investigations using an apparatus equipped with an optical spectrometer
Robust control of magnetic bearings in subcritical machines
Role of bicarbonate in the actions of [gamma]-aminobutyric acid (GABA) on membrane conductances, currents and pH regulation in excitable cells
Sampling and calibration in process analytical chemistry
Selection of new underground mining technology : mining as a process versus conventional methods
Self-excited ice-induced vibrations of an arctic oil drilling structure
Self-organizing maps for signal and symbol sequences
SEM studies of fractures of rigid PVC pipes
Semi-blind detection of co-channel signals in mobile communications
Sensitivity studies of external beam PIXE, PIGE and NRB methods : application to medical and biological samples
Sensor fault detection using state vector estimator and feed-forward neural networks applied to a simulated biochemical process
Separation of methanol-ethanol and ethanol-n-heptane mixtures by reverse osmosis and pervaporation
Separation of promethium from a natural lanthanide mixture
Separation of propane and propylene
Short term production scheduling of the pulp mill
Silane compounds as external donors in stereoselective polymerization of propene with a heterogeneous Ziegler-Natta catalyst
Silicon detectors for X-ray spectrometry
Silver film ion-exchanged glass optical single-mode channel waveguides and components
Simple diffractometrical procedure to determine the damaged surface layer in grinding of Hadfield manganese steels
Simulation and control of continuous crystallisation
Simulation and control of heat transfer in continuous casting of steel
Simulation of copper smelting and slag cleaning stages by laboratory scale particle jet smelting technique
Simulation of earthquake ground motion and structural response
Simulation of the flow past a long-range artillery projectile
Single crystals grown by the Bridgam-method in a protective atmosphere
Single ion activity measurements in the system hydrochloric acid - aluminum chloride - water by the electromotive force method
Sinuscan, a simple ultrasonic instrument to detect maxillary and frontal sinusitis
Slope stability analysis under three-dimensional stress condition and stabilization design of cable bolting
Small angle boundaries and dynamic recovery in aluminium-magnesium alloys
Software integration technologies in industrial applications
Software process asset management and deployment in a multi-site organization
Software tools for rapid prototyping technologies in manufacturing
Solution methods and turbulence modeling for heat transfer problems
Some effects of deoxidation on the machinability of quenched and tempered steel
Some improvements to the approximate analytical solution of the problem of laminar flow between permeable and impermeable wall
Some observations on the fatigue mechanism in body-centred iron
Space-time finite element methods for second order problems : an algorithmic approach
Stability of continuous emulsion polymerization of vinyl chloride, and computer simulation of its non-linear dynamic behavior
State estimation of polynomial type non-linear differential systems
Statistical analysis and optimization of stack filters
Steady-state and unsteady heat transfer between a fluid and a flat plate with coupled convection, conduction and radiation
Strategic framework for the interactive information networks industry
Stress analysis of thin shells of revolution under non-symmetric loads
Stress-induced stacking faults in alpha Cu-Al alloys
Structural optimisation of an induction motor using a genetic algorithm and a finite element method
Structure and properties of MoSi[sub 2] and Mo-Si-N based nanocomposite coatings
Structure and properties of MoSi[sub 2] and Mo-Si-N based nanocomposite coatings
Structure-property relations for some highly active ansa-metallocene catalysts in olefin polymerization : a polymerization study
Studies of Amorphous hydrogen-free diamond-like films produced by ion and plasma beam techniques
Studies of protrusion growth and inhibitor action in electrodeposition
Studies of relaxation mechanisms in polymers by square and triangular periodic stress functions
Studies of seeding particle velocities in a circular free jet using a laser-doppler anemometer
Studies of the dynamic and mechanical properties of thermoplastics by the split Hopkinson pressure bar method
Studies of the electronic properties of conjugated polymers : from dimerization to charge transport in polymeric transistors
Studies of the mechanical properties of cross-country skis
Studies of the properties of unbleached sulphite pulp with reference to their influence on the rosin sizing of paper
Studies on aggregation and heteroaggregation in particle separation systems
Studies on autoxidizable N,N'-bis(methoxymethyl)urea copolycondensates and autoxidation of allyl ether compounds
Studies on co- and terpolymerization of ethylene with higher linear 1-olefins using zirconium based metallocenes
Studies on computer aided modelling, simulation and optimization in process development
Studies on ethylene copolymerization with 1-butene and long chain [alpha]-olefins
Studies on integral-equation based modeling of mise-à-la-masse anomalies for geophysical surveying
Studies on irradiation induced aerosol particle formation processes in air containing sulphur dioxide
Studies on morphology, compatibilization, and properties of polypropylene based blends
Studies on nonlinear dynamics of driven vibrating systems with dissipation
Studies on parametric instabilities in high-frequency wave heating of fusion plasmas
Studies on polyolefin product extrusion and compounding in a twin-screw extruder
Studies on solar heating systems with long-term heat storage for northern high latitudes
Studies on the consequences of the control of nitrogen oxide emission : slagging of ash and scrubbing of flue gas
Studies on the fractionation of alkali lignings
Studies on the insulated gate bipolar transistors and the wide bandgap semiconductor power diodes
Studies on the molecular composition and structure of metallocene- and Ziegler-Natta-catalyzed ethylene-[alpha]-olefin copolymers
Studies on the ternary system copper-magnesium-silicon
Study of hydrogen trapping at precipitates in view of fusion reactor materials
Study on entrainment mechanism in dispersed flotation suspensions
Study on the structural behaviour and composite action in composite slim floor beams
Subspace classifiers in recognition of handwritten digits
Superconducting homopolar machinery : liquid metal current collection and design principles
Supplier management in just-in-time manufacturing
Supply chain development in process industry
Susceptibility measuring device for the following of a martensitic transformation during tensile testing
Switching vector theory : unification of switching and space-vector in polyphase converter applications
Synchrotron section topographic studies of silicon
Synchrotron x-ray topography : a multistereoscopic imaging technique
Syneresis of cellulose nitrate gels
Synthesis and analysis of some sulphur and nitrogen containing conducting polymers including conducting polymer blends of poly(3-octylthiophene)
Synthesis and characterization of lactic acid based poly(ester-urethanes)
Synthesis of lossless networks consisting of cascaded commensurate transmission lines and frequency-invariant two-ports
System usability of complex technical systems
Systematic approaches to parallel architectures for DSP algorithms
Task-oriented approach to interactive control of heavy-duty manipulators based on coarse scene description
Technical change, innovations and technological causality : an empirical and philosophical enquiry
Techniques for the analysis of non-linear systems : with applications to solid and structural mechanics
Techno-economic assessment of integrated community and commercial solid wastes utilization process cases
Text mining with the WEBSOM
Texture segmentation and shape classification with histogram techniques and self-organizing maps
The average absorption of monochromatic X-rays as a function of particle size in multiphase systems
The behaviour of rock under impulse loads : A study using the Hopkinson split bar method
The chemical aspects of poor floatability of fine pentlandite
The composition of a spent spruce sulfite liquor
The conditions required for inventions to achieve utilisation agreement
The crystal chemistry of some sodium polysulphides
The decomposition of potash feldspar : 2
The dimensioning of local telephone traffic routes based on the distribution of the traffic carried
The effect of ageing on the toughness and ductility of martensite
The effect of bracing on the behaviour of double girder slab bridges
The effect of exhaust pressure on the economy of condensing turbines at low cooling water temperature
The effect of expanded laser beams in optical correlation experiments
The effect of magnetic flocculation in the beneficiation of magnetic materials
The effect of mixing time and catalyst addition on the compatibility of PET/LCP blends
The effect of processing conditions and resin structure on impact strength : long-term performance and fracture morphology of rigid PVC pipes
The effect of second order derivatives in the coupled wave analysis of volume holograms
The effect of tempering on the toughness of hardened steel
The effect of the plutonium conversion on the prompt temperature coefficient of Triga
The effects of aging on the deformation behaviour of Fe-Ni-C plate martensite
The effects of the practical machining parameters on the formation of a tool wear inhibiting layer
The etherification of 2-methylpropene, 2-methyl-1-butene and 2-methyl-2-butene with alcohols
The EXCELL method for efficient geometric access to data
The growth of a stable solid nucleus in supercooled pure melts
The high-speed induction motor : calculating the effects of solid-rotor material on machine characteristics
The high-speed induction motor : calculating the effects of solid-rotor material on machine characteristics
The identification and robust control of time variable flow processes : a FIR approach
The influence of grain size on the fatigue behaviour of Armco iron
The influence of low temperature precipitation on the fatigue behaviour of Armco iron
The Kemi chromite : review of concentrating characteristics and concentration tests
The kinematics and strength of biharmonic gear drives
The kinetics of hydrogen reduction of cobalt oxide
The lifetime of satellite 1958[alpha] 1 (Explorer 1)
The measurement of conductivity in semiconductors with the aid of microwaves
The measurement of the Hall effect with the aid of microwaves in germanium specimens changing from n-type to p-type with changing temperature
The modeling and actuator space control of flexible hydraulic cranes
The n-butyllithium-initiated polymerization of myrcene and its copolymerization with styrene
The nucleation of martensite in precipitates of iron in a copper matrix
The occurrence of massive ferrite in the heat affected zones of some welded high-strength structural steels corroding in sea water
The performance of an electrostatic cylindrical spectrometer in analysis of nonrelativistic electron energies
The polymerization of 2,3-dihydropyran by triethylaluminium-titanium tetrachloride catalysts
The principles of energy dispersive X-ray spectrometry using the proportional counter
The principles of visual measurements
The relativistic KKR-CPA method : a study of electronic structures of Cu[sub 75]Au[sub 25], Au[sub 70]Pd[sub 30], and Cu[sub 75]Pt[sub 25] disordered alloys
The role of end temperature in the resistance welding of carbon steels
The role of metadata in electronic publishing
The spray impingement theory of ignition delay in small swirl-chambor diesel engines
The stability of the bromo complexes of cadmium : a potentiometric investigation using a cell without liquid junction
The steady state effective thermal conductivity of closed wetted porous systems
The structure and effectiveness of industrial maintenance
The suspension of solid particles in mixers and flotation cells
The theory and construction of a proposed superconducting aeromagnetic gradiometer
The thermodynamic model of interior ballistics
The thermodynamics of As, Sb, Cu, Bi, Ni, Se, Te and Sn in the fire-refining of copper by sodium carbonate slag
The transient field of a conducting permeable sphere in a uniform external field
The transverse motion of a particle in a turbulent boundary layer
The viability of rehabilitated apartment buildings : a feasibility study method for building rehabilitation projects developed by action research
Theoretical studies of impurity-metal interactions
Theoretical studies on binary homogeneous nucleation
Theory and applications of a multi-circuit heat pump system
Theory and design of narrow-passband stripline filters with finite transmission zeros realized with extra cross couplings
Theory of the reserve method in slow neutron timeof-flight spectrometry
Thermal analysis of high-speed induction machines
Thermal and catalytic reactions of the C-O bond in lignin and coal related aromatic methyl ethers
Thermal conditions in the ground from the viewpoint of foundation work, heating and plumbing installations and draining
Thermal fatigue of austenitic and duplex stainless steels
Thermal modelling of high-speed induction machines
Thermal nondestructive testing using active line-scanning infrared radiometry
Thermal reactions of the C-O and alkyl C-C bonds in lignin model compounds
Thermodynamic analysis of chemical and electrochemical systems with a computer program : basic theory with illustrations
Thermodynamic study on CrO[sub x] containing slags
Thermodynamics of steel dephosphorization with highly basic CaO-Fe[sub t]O based slags
Thermophosphate fertilizers from Siilinjärvi apatite
Thermopower of FeCl[sub 3]-doped polyparaphenylene
Thinking model and tools for understanding user experience related to information appliance product concepts
Three dimensional distinct element modelling of mining-induced subsidence at the footwall of a steeply dipping orebody
Tight binding core states of trigonal selenium
Time-of-flight spectrometry of recoiled atoms in the analysis of thin films
Topics in systems theory : publication in honour of professor Hans Blomberg on the occasion of his sixtieth birthday on December 18th, 1979
Topics in technical physics : publication in honour of professor Erkki Laurila on the occasion of his seventieth birthday on August 20th, 1983
Torsional vibration analysis of internal combustion engine shafting system
Transient response model of low-speed diesel engine in ice-breaking cargo vessels
Transient voltage distribution in stator winding of electrical machine fed from a frequency converter
Tray efficiency prediction of an industrial distillation column
Treatise on microelectronics
Tribology of prosthetic joints : validation of wear simulation methods
Tribology of total replacement hip joints studied with new hip joint simulators and a materials-screening apparatus
Triple coincidence and correlation measurements of gamma rays from Pb[sup 208]
Two-dimensional numerical modeling of advanced semiconductor devices from the physical point of view
Ultrasonic ophtalmoscope
Ultrasound detection of microbe contamination in premade food
Uncertainty management in telecommunications uninterruptible power supply systems and on their network by utilizing human reasoning methodology
Untersuchungen zu den optischen Systemen zur Ermittlung der Fourier-Transformation und der Hilbert-Transformation
User profiling and classification for fraud detection in mobile communications networks
User studies : a practical approach to user involvement for gathering user needs and requirements
Using self-organizing maps and learning vector quantization for mixture density hidden Markov models
Utilization of harmonics for self-excitation of a synchronous generator by placing an auxiliary winding in the rotor
Utilization of pneumatic atomization nozzles in the spray crystallization of polyolefin catalyst carriers
Utilization of spray crystallization process in polyolefins catalyst preparation : study of the crystallization of the atomized catalyst carrier melt in cooled spray chamber
Wave normal and ray propagation in lossless positive bianisotropic media
Wear damage prediction of sliding contacts applied to ball valves
Wear properties of high nitrogen austenitic stainless steels
What is design? : definition of the contribution rate of the appeal indexes and design rate in product development
X-ray diffraction and ellipsometric studies of zinc sulfide thin films grown by atomic layer epitaxy
X-ray diffraction studies of aluminium powder and electroluminescent zinc sulphide thin films
X-ray diffraction studies of aluminium powder and electroluminescent zinc sulphide thin films
X-ray excited optical fluorescence of nine rare earth ions in Y[sub 2]O[sub 3], Gd[sub 2]O[sub 3], and La[sub 2]O[sub 3]
X-ray scattering studies on weakly ordered materials
Zero change in length at the hardening and austempering of steel
Zone electrophoresis in a narrow-bone tube employing potentiometric detection
Über die Darstellung der Spülung bei schrittweisen Rechnungen des Ladungswechsels von Zweitakt-Dieselmotoren
Über die Einschätzung von Biegespannungen in gekrümmten Balken
Über die Messung der Spannungsverluste in Stahl bei erhöhten Temperaturen
Über die Tracerdiffusion in wässrigen Elektrolytlösungen vom Standpunkt der Thermodynamik der irreversiblen Prozesse
Über die Tragfähigkeit eines aussermittig belasteten aus Streifen zusammengesetzten rechteckigen Pfeilers unterhalb der Proportionalitätsgrenze, wenn die Streifen zusammenarbeiten und das Pfeilermaterial keine Zugfestigkeit hat
inLanguage
en
isPartOf
Fennica
issn
000-687X
0001- 687X
0001-6845
0001-6853
0001-6861
0001-687X
0001-6888
0355-2705
0355-2713
0355-2721
0781-2698
1237-2404
1238-9803
1239-0518
1456-9418
1456-9426
name
Acta polytec. Scand., Annot. index
Acta polytec. Scand., Ch, Chem. technol. metall. ser
Acta polytech. Scand., Ch, Chem. technol. ser
Acta polytech. Scand., Chem. incl. metall. ser
Acta polytech. Scand., Ci
Acta polytech. Scand., El
Acta polytech. Scand., IM Ind. manag. bus. adm. ser
Acta polytech. Scand., MA Math. comput. ser
Acta polytech. Scand., Ma, Math. comput. eng. ser
Acta polytech. Scand., Ma, Math. comput. sci. ser
Acta polytech. Scand., Ma, Math., comput. manag. eng. ser
Acta polytech. Scand., Math. comput. mach. ser
Acta polytech. Scand., Me
Acta polytech. Scand., Ph
Acta polytech. Scand., Ph, Appl. phys. ser
Acta polytechnica Scandinavia. IM
Acta polytechnica Scandinavica : Annotated index
Acta polytechnica Scandinavica : annoted index 1958-1966
Acta polytechnica Scandinavica : Ch, Chemical technology and metallurgy series
Acta polytechnica Scandinavica : Ch, Chemical technology series
Acta polytechnica Scandinavica : Chemistry including metallurgy series
Acta polytechnica Scandinavica : Ci, Civil engineering and building construction series
Acta polytechnica Scandinavica : El, Electrical engineering series
Acta polytechnica Scandinavica : IM, Industrial management and business administration series
Acta polytechnica Scandinavica : Ma, Mathematics and computer science series
Acta polytechnica Scandinavica : Ma, Mathematics and computing in engineering series
Acta polytechnica Scandinavica : MA, Mathematics and computing series
Acta polytechnica Scandinavica : Ma, Mathematics, computing and management in engineering series
Acta polytechnica Scandinavica : Mathematics and computing machinery series
Acta polytechnica Scandinavica : Me, Mechanical engineering series
Acta polytechnica Scandinavica : Ph, Applied physics series
Acta polytechnica Scandinavica : Ph, Physics including nucleonics series
Acta polytechnica Scandinavica, Chemical technology and metallurgy series
Acta polytechnica Scandinavica, Chemistry including metallurgy series
Acta polytechnica Scandinavica, Civil engineering and building construction series
Acta polytechnica Scandinavica, Electrical engineering series
Acta polytechnica Scandinavica, Finnish contribution
Acta polytechnica Scandinavica, Mathematics and computer science series
Acta polytechnica Scandinavica, Mathematics and computing machinery series
Acta polytechnica Scandinavica, Mechanical engineering series
Acta polytechnica Scandinavica, Physics including nucleonics series
Acta polytechnica Scandinavica, Physics including nucleonies series
Acta polytechnica Scandinavica. Applied physics series
Acta polytechnica Scandinavica. C: Mathematics and computer science series
Acta polytechnica Scandinavica. Ch
Acta polytechnica Scandinavica. Ch, Chemical technology and metallurgy series
Acta Polytechnica Scandinavica. Ch, Chemical technology series
Acta polytechnica Scandinavica. Ch, Chemical technology series
Acta polytechnica Scandinavica. Ch, Chemistry including metallurgy series
Acta polytechnica Scandinavica. Chemical technology and metallurgy series
Acta polytechnica Scandinavica. Chemistry including metallurgy series
Acta polytechnica Scandinavica. Ci
Acta polytechnica Scandinavica. Ci, Civil engineering and building construction series
Acta Polytechnica Scandinavica. Ci, Civil engineering and building construction series
Acta polytechnica Scandinavica. El
Acta polytechnica Scandinavica. El, Electrical engineering series
Acta polytechnica Scandinavica. IM
Acta polytechnica Scandinavica. IM, Industrial management and business administration series
Acta polytechnica Scandinavica. MA
Acta polytechnica Scandinavica. Ma
Acta Polytechnica Scandinavica. Ma, Mathematics and computer science series
Acta polytechnica Scandinavica. Ma, Mathematics and computing in engineering series
Acta polytechnica Scandinavica. Ma, Mathematics and computing series
Acta polytechnica Scandinavica. MA, Mathematics and computing series
Acta Polytechnica Scandinavica. Ma, Mathematics and computing series
Acta polytechnica Scandinavica. Ma, Mathematics, computing and management in engineering series
Acta polytechnica Scandinavica. Me
Acta polytechnica Scandinavica. Me, Mechanical engineering series
Acta polytechnica Scandinavica. Ph
Acta Polytechnica Scandinavica. Ph, Applied physics series
Acta polytechnica Scandinavica. Ph, Applied physics series
Acta polytechnica Scandinavica. Ph, Physics including nucleonic series
Acta polytechnica Scandinavica. Ph, Physics including nucleonics series
Acta polytechnica Scandinavica. Physics
Acta Polytehnica Scandinavica. El, Electrical engineering series
Chemistry including metallurgy series
P60049
<http://rdaregistry.info/termList/RDAContentType/1020>
sameAs
<https://issn.org/resource/issn/0001-6845>
<https://issn.org/resource/issn/0001-6853>
<https://issn.org/resource/issn/0001-6861>
<https://issn.org/resource/issn/0001-6888>
<https://issn.org/resource/issn/0355-2705>
<https://issn.org/resource/issn/0355-2713>
<https://issn.org/resource/issn/0355-2721>
<https://issn.org/resource/issn/0781-2698>
<https://issn.org/resource/issn/1237-2404>
<https://issn.org/resource/issn/1238-9803>
<https://issn.org/resource/issn/1239-0518>
<https://issn.org/resource/issn/1456-9418>
<https://issn.org/resource/issn/1456-9426>
Instances
1958 : Teknillisten tieteiden akatemia
1958-1974 : Suomen teknillisten tieteiden akatemia
1958-2002 : Teknillisten tieteiden akatemia
1958/.. : Teknillisten tieteiden akatemia
1958/.. : Teknillisten tieteiden akatemia
1958/1983 : Teknillisten tieteiden akatemia
1963/.. : Teknillisten tieteiden akatemia
1966 : Acta Polytechnica Scandinavica Publishing Office
1975-1993 : Teknillisten tieteiden akatemia
1976/.. : Teknillisten tieteiden akatemia
1983-1994 : The Finnish Academy of Technical Sciences
1994/1995 : Teknillisten tieteiden akatemia
1995- : Teknillisten tieteiden akatemia
1995/1999 : Teknillisten tieteiden akatemia
2000- : Teknillisten tieteiden akatemia
2000/.. : Teknillisten tieteiden akatemia
View this in Finna
Acta polytechnica Scandinavica : Ph, Physics including nucleonics series
URI:
http://urn.fi/URN:NBN:fi:bib:me:I00310791600
datePublished
1958
1958/1975
description
Ceased publication
Kuvailun perusta: No. 66.
identifier
propertyID:
FI-FENNI
value:
171198
propertyID:
FI-MELINDA
value:
003107916
propertyID:
skl
value:
fx171198
isPartOf
Fennica
issn
0001-6888
name
Acta polytech. Scand., Ph
Acta polytechnica Scandinavica : Ph, Physics including nucleonics series
P60048
<http://rdaregistry.info/termList/RDACarrierType/1049>
P60050
<http://rdaregistry.info/termList/RDAMediaType/1007>
publication
location:
Helsinki
organizer:
Suomen teknillisten tieteiden akatemia Teknillisten tieteiden akatemia
publisher
Suomen teknillisten tieteiden akatemia
Teknillisten tieteiden akatemia
sameAs
<https://issn.org/resource/issn/0001-6888>
View this in Finna
Acta polytechnica Scandinavica : Mathematics and computing machinery series
URI:
http://urn.fi/URN:NBN:fi:bib:me:I00067462300
datePublished
1958-1974
1958/1974
description
Ceased publication
Kuvailun perusta: Nr. 24.
identifier
propertyID:
FI-FENNI
value:
171196
propertyID:
FI-MELINDA
value:
000674623
propertyID:
skl
value:
fx171196
isPartOf
Fennica
issn
0001-6861
name
Acta polytech. Scand., Math. comput. mach. ser
Acta polytechnica Scandinavica : Mathematics and computing machinery series
P60048
<http://rdaregistry.info/termList/RDACarrierType/1049>
P60050
<http://rdaregistry.info/termList/RDAMediaType/1007>
publication
location:
Helsinki
organizer:
Suomen teknillisten tieteiden akatemia Teknillisten tieteiden akatemia
publisher
Suomen teknillisten tieteiden akatemia
Teknillisten tieteiden akatemia
sameAs
<https://issn.org/resource/issn/0001-6861>
View this in Finna
Acta polytech. Scand., Ci
URI:
http://urn.fi/URN:NBN:fi:bib:me:I00067489700
datePublished
1958-2002
1958/2002
description
Ceased publication
Kuvailun perusta: N:o 79.
identifier
propertyID:
FI-FENNI
value:
171843
propertyID:
FI-MELINDA
value:
000674897
propertyID:
skl
value:
fx171843
isPartOf
Fennica
issn
0355-2705
name
Acta polytech. Scand., Ci
Acta polytechnica Scandinavica : Ci, Civil engineering and building construction series
P60048
<http://rdaregistry.info/termList/RDACarrierType/1049>
P60050
<http://rdaregistry.info/termList/RDAMediaType/1007>
publication
location:
Helsinki
organizer:
Suomen teknillisten tieteiden akatemia Teknillisten tieteiden akatemia
publisher
Suomen teknillisten tieteiden akatemia
Teknillisten tieteiden akatemia
sameAs
<https://issn.org/resource/issn/0355-2705>
View this in Finna
Acta polytech. Scand., Me
URI:
http://urn.fi/URN:NBN:fi:bib:me:I00067462400
datePublished
1958-
1958/..
description
Currently published
Julkaisijan nimi myös muodossa: Finnish Academy of Technology.
Kuvailun perusta: 66.
identifier
propertyID:
FI-FENNI
value:
171197
propertyID:
FI-MELINDA
value:
000674624
propertyID:
skl
value:
fx171197
isPartOf
Fennica
issn
0001-687X
name
Acta polytech. Scand., Me
Acta polytechnica Scandinavica : Me, Mechanical engineering series
P60048
<http://rdaregistry.info/termList/RDACarrierType/1049>
P60050
<http://rdaregistry.info/termList/RDAMediaType/1007>
publication
location:
Helsinki
organizer:
Suomen teknillisten tieteiden akatemia Teknillisten tieteiden akatemia
publisher
Suomen teknillisten tieteiden akatemia
Teknillisten tieteiden akatemia
View this in Finna
Acta polytechnica Scandinavica : El, Electrical engineering series
URI:
http://urn.fi/URN:NBN:fi:bib:me:I00067462200
datePublished
1958-
1958/..
description
Currently published
Julkaisijan nimi esiintyy myös muodossa: Finnish Academy of Technology.
Kuvailun perusta: No. 30.
identifier
propertyID:
FI-FENNI
value:
171194
propertyID:
FI-MELINDA
value:
000674622
propertyID:
FI-MELINDA
value:
003107912
propertyID:
skl
value:
fx171194
isPartOf
Fennica
issn
0001-6845
name
Acta polytech. Scand., El
Acta polytechnica Scandinavica : El, Electrical engineering series
P60048
<http://rdaregistry.info/termList/RDACarrierType/1049>
P60050
<http://rdaregistry.info/termList/RDAMediaType/1007>
publication
location:
Helsinki
organizer:
Suomen teknillisten tieteiden akatemia Teknillisten tieteiden akatemia
publisher
Suomen teknillisten tieteiden akatemia
Teknillisten tieteiden akatemia
sameAs
<https://issn.org/resource/issn/0001-6845>
View this in Finna
Acta polytech. Scand., Chem. incl. metall. ser
URI:
http://urn.fi/URN:NBN:fi:bib:me:I00408621700
datePublished
1958-1983
1958/1983
description
Ceased publication
Kuvailun perusta: 109.
identifier
propertyID:
FI-FENNI
value:
171195
propertyID:
FI-MELINDA
value:
004086217
propertyID:
skl
value:
fx171195
isPartOf
109
Fennica
issn
0001-6853
name
Acta polytech. Scand., Chem. incl. metall. ser
Acta polytechnica Scandinavica : Chemistry including metallurgy series
P60048
<http://rdaregistry.info/termList/RDACarrierType/1049>
P60050
<http://rdaregistry.info/termList/RDAMediaType/1007>
publication
location:
Helsinki
organizer:
Suomen teknillisten tieteiden akatemia Teknillisten tieteiden akatemia
publisher
Suomen teknillisten tieteiden akatemia
Teknillisten tieteiden akatemia
sameAs
<https://issn.org/resource/issn/0001-6853>
View this in Finna
Acta polytechnica Scandinavica : Annotated index
URI:
http://urn.fi/URN:NBN:fi:bib:me:I00068550300
datePublished
1963-
1963/..
description
Currently published
identifier
propertyID:
FI-FENNI
value:
192178
propertyID:
FI-MELINDA
value:
000685503
isPartOf
Fennica
issn
0788-3978
name
Acta polytec. Scand., Annot. index
Acta polytechnica Scandinavica : Annotated index
P60048
<http://rdaregistry.info/termList/RDACarrierType/1049>
P60050
<http://rdaregistry.info/termList/RDAMediaType/1007>
publication
location:
Helsinki
organizer:
Teknillisten tieteiden akatemia
publisher
Teknillisten tieteiden akatemia
sameAs
<https://issn.org/resource/issn/0788-3978>
View this in Finna
Acta polytechnica Scandinavica : annoted index 1958-1966
URI:
http://urn.fi/URN:NBN:fi:bib:me:I00071610100
datePublished
1966
identifier
propertyID:
FI-FENNI
value:
264474
propertyID:
FI-MELINDA
value:
000716101
propertyID:
skl
value:
f640018
isPartOf
Fennica
name
Acta polytechnica Scandinavica : annoted index 1958-1966
numberOfPages
[2], 68, [1] s
P60048
<http://rdaregistry.info/termList/RDACarrierType/1049>
P60050
<http://rdaregistry.info/termList/RDAMediaType/1007>
publication
location:
Stockholm
organizer:
Acta Polytechnica Scandinavica Publishing Office
publisher
Acta Polytechnica Scandinavica Publishing Office
View this in Finna
Acta polytechnica Scandinavica : Ma, Mathematics and computer science series
URI:
http://urn.fi/URN:NBN:fi:bib:me:I00067489800
datePublished
1975-1993
1975/1993
description
Ceased publication
Kuvailun perusta: No 24.
identifier
propertyID:
FI-FENNI
value:
171844
propertyID:
FI-MELINDA
value:
000674898
propertyID:
skl
value:
fx171844
isPartOf
Fennica
issn
0355-2713
name
Acta polytech. Scand., Ma, Math. comput. sci. ser
Acta polytechnica Scandinavica : Ma, Mathematics and computer science series
P60048
<http://rdaregistry.info/termList/RDACarrierType/1049>
P60050
<http://rdaregistry.info/termList/RDAMediaType/1007>
publication
location:
Helsinki
organizer:
Suomen teknillisten tieteiden akatemia Teknillisten tieteiden akatemia
publisher
Suomen teknillisten tieteiden akatemia
Teknillisten tieteiden akatemia
sameAs
<https://issn.org/resource/issn/0355-2713>
View this in Finna
Acta polytechnica Scandinavica : Ph, Applied physics series
URI:
http://urn.fi/URN:NBN:fi:bib:me:I00067489900
datePublished
1976-
1976/..
description
Currently published
Kuvailun perusta: No. 111.
identifier
propertyID:
FI-FENNI
value:
171845
propertyID:
FI-MELINDA
value:
000674899
propertyID:
skl
value:
fx171845
isPartOf
Fennica
issn
0355-2721
name
Acta polytech. Scand., Ph, Appl. phys. ser
Acta polytechnica Scandinavica : Ph, Applied physics series
P60048
<http://rdaregistry.info/termList/RDACarrierType/1049>
P60050
<http://rdaregistry.info/termList/RDAMediaType/1007>
publication
location:
Helsinki
organizer:
Suomen teknillisten tieteiden akatemia Teknillisten tieteiden akatemia
publisher
Suomen teknillisten tieteiden akatemia
Teknillisten tieteiden akatemia
sameAs
<https://issn.org/resource/issn/0355-2721>
View this in Finna
Acta polytec. Scand., Ch, Chem. technol. metall. ser
URI:
http://urn.fi/URN:NBN:fi:bib:me:I00067779600
datePublished
1983-1994
1983/1994
description
Ceased publication
identifier
propertyID:
FI-FENNI
value:
177259
propertyID:
FI-MELINDA
value:
000677796
isPartOf
Fennica
issn
0781-2698
name
Acta polytec. Scand., Ch, Chem. technol. metall. ser
Acta polytechnica Scandinavica : Ch, Chemical technology and metallurgy series
P60048
<http://rdaregistry.info/termList/RDACarrierType/1049>
P60050
<http://rdaregistry.info/termList/RDAMediaType/1007>
publication
location:
Helsinki
organizer:
The Finnish Academy of Technical Sciences
publisher
The Finnish Academy of Technical Sciences
sameAs
<https://issn.org/resource/issn/0781-2698>
View this in Finna
Acta polytechnica Scandinavica : Ma, Mathematics and computing in engineering series
URI:
http://urn.fi/URN:NBN:fi:bib:me:I00075925100
datePublished
1994-1995
1994/1995
description
Ceased publication
Kuvailun perusta: 66.
identifier
propertyID:
FI-FENNI
value:
351865
propertyID:
FI-MELINDA
value:
000759251
propertyID:
FI-MELINDA
value:
004483715
propertyID:
skl
value:
fx351865
isPartOf
Fennica
issn
1237-2404
name
Acta polytech. Scand., Ma, Math. comput. eng. ser
Acta polytechnica Scandinavica : Ma, Mathematics and computing in engineering series
P60048
<http://rdaregistry.info/termList/RDACarrierType/1049>
P60050
<http://rdaregistry.info/termList/RDAMediaType/1007>
publication
location:
Helsinki
organizer:
Teknillisten tieteiden akatemia
publisher
Teknillisten tieteiden akatemia
sameAs
<https://issn.org/resource/issn/1237-2404>
View this in Finna
Acta polytechnica Scandinavica : Ch, Chemical technology series
URI:
http://urn.fi/URN:NBN:fi:bib:me:I00082013300
datePublished
1995-
1995/..
description
Currently published
identifier
propertyID:
FI-FENNI
value:
464497
propertyID:
FI-MELINDA
value:
000820133
isPartOf
Fennica
issn
1239-0518
name
Acta polytech. Scand., Ch, Chem. technol. ser
Acta polytechnica Scandinavica : Ch, Chemical technology series
P60048
<http://rdaregistry.info/termList/RDACarrierType/1049>
P60050
<http://rdaregistry.info/termList/RDAMediaType/1007>
publication
location:
Espoo
organizer:
Teknillisten tieteiden akatemia
publisher
Teknillisten tieteiden akatemia
sameAs
<https://issn.org/resource/issn/1239-0518>
View this in Finna
Acta polytechnica Scandinavica : Ma, Mathematics, computing and management in engineering series
URI:
http://urn.fi/URN:NBN:fi:bib:me:I00081787500
datePublished
1995-1999
1995/1999
description
Ceased publication
Kuvailun perusta: 79.
identifier
propertyID:
FI-FENNI
value:
459489
propertyID:
FI-MELINDA
value:
000817875
propertyID:
skl
value:
fx459489
isPartOf
Fennica
issn
1238-9803
name
Acta polytech. Scand., Ma, Math., comput. manag. eng. ser
Acta polytechnica Scandinavica : Ma, Mathematics, computing and management in engineering series
P60048
<http://rdaregistry.info/termList/RDACarrierType/1049>
P60050
<http://rdaregistry.info/termList/RDAMediaType/1007>
publication
location:
Espoo
organizer:
Teknillisten tieteiden akatemia
publisher
Teknillisten tieteiden akatemia
sameAs
<https://issn.org/resource/issn/1238-9803>
View this in Finna
Acta polytech. Scand., IM Ind. manag. bus. adm. ser
URI:
http://urn.fi/URN:NBN:fi:bib:me:I00389228500
datePublished
2000-
2000/..
description
Currently published
Kuvailun perusta: 6.
identifier
propertyID:
FI-FENNI
value:
638972
propertyID:
FI-MELINDA
value:
003892285
propertyID:
skl
value:
fx638972
isPartOf
Fennica
issn
1456-9426
name
Acta polytech. Scand., IM Ind. manag. bus. adm. ser
Acta polytechnica Scandinavica : IM, Industrial management and business administration series
P60048
<http://rdaregistry.info/termList/RDACarrierType/1049>
P60050
<http://rdaregistry.info/termList/RDAMediaType/1007>
publication
location:
Espoo
organizer:
Teknillisten tieteiden akatemia
publisher
Teknillisten tieteiden akatemia
sameAs
<https://issn.org/resource/issn/1456-9426>
View this in Finna
Acta polytech. Scand., MA Math. comput. ser
URI:
http://urn.fi/URN:NBN:fi:bib:me:I00224338200
datePublished
2000-
2000/..
description
Currently published
Kuvailun perusta: 103.
identifier
propertyID:
FI-FENNI
value:
638974
propertyID:
FI-MELINDA
value:
002243382
propertyID:
FI-MELINDA
value:
003894975
propertyID:
FI-MELINDA
value:
004636952
propertyID:
skl
value:
fx638974
isPartOf
Fennica
issn
1456-9418
name
Acta polytech. Scand., MA Math. comput. ser
Acta polytechnica Scandinavica : MA, Mathematics and computing series
P60048
<http://rdaregistry.info/termList/RDACarrierType/1049>
P60050
<http://rdaregistry.info/termList/RDAMediaType/1007>
publication
location:
Espoo
organizer:
Teknillisten tieteiden akatemia
publisher
Teknillisten tieteiden akatemia
sameAs
<https://issn.org/resource/issn/1456-9418>
Download this resource as RDF:
Turtle
RDF/XML
N-Triples
JSON-LD
