Åbo akademi. Institutionen för anläggningsteknik. Report

contributor

• Åbo Akademi. Institutionen för anläggningsteknik
• Åbo Akademi. Laboratoriet för anläggningsteknik

hasPart

• A class of transformations convexifying and underestimating negative signomial terms
• A class of transformations convexifying and underestimating positive signomial terms
• A comparison between a MILP-based decomposition method and a genetic algorithm in scheduling applications
• A cutting plane method for solving convex MINLP problems
• A feasibility study on the active coke flue-gas cleaning process
• A flattest ascent heuristic for the solution of separable NLP-problems
• A method for calibrating industrial measurements
• A method to account for the effect of air in the ATR tunnel cell : applied to quantitative FT-IR measurements of glucose and sodium gluconate in an Aspergillus niger fermentation
• A model for the atmospheric CO[sub 2] change
• A modified alpha-ECP algorithm for solving quasi-convex NLP problems
• A research reactor for reduction of NO[sub x] and SO[sub 2] emissions
• A sequential cutting plane algorithm for solving NLP problems
• A simple method for fitting the log-normal distribution to empirical size distribution data
• A study on spray dry and coolside desulfurization
• A study on the drying process of pigment coated paper webs
• Adaptive on-line model for detecting the cohesive zone level in blast furnace
• Alpha-ECP, version 1.01 : user's guide for an interactive MINLP-solver based on the extended cutting plane method
• Alpha-ECP, version 4.0 : an interactive MINLP-solver based on the extended cutting plane method
• Alpha-ECP, version 5.01 : an interactive MINLP-solver based on the extended cutting plane method
• An alternative formulation for solving optimal flexible pump configurations with MINLP
• An analytical approach to solve the Kramer-Krönig transformation and its application on glasses
• An application of Lagrangian relaxation in mid-term planning of district heating systems
• An experimental study of some paperdrier drainage rotary siphons
• An extended cutting plane (ECP) method for the solution of MINLP problems
• An extended cutting plane method for a class of non-convex MINLP problems
• An industrial application of mixed-time MILP-based production and intermediate storage planning : case Mänttä Tissue Mill
• An introduction to fourier transform infrared spectroscopy
• An on-line model for estimating the melting zone in a blast furnace
• Approximation of stable systems by Laguerre filters
• Beräkning av den logaritmiska medeltemperaturdifferensens korrektionsfaktor för blandströmsvärmeväxlare
• Bioprocess monitoring with the Workir 100 : a study in implementation aspects
• Calcium-based sorbents in flue-gas desulfurization : a literature review
• Combined continuous- and discrete-time modelling of production planning problems with aging profile requirements
• Comparison of different MINLP methods applied on certain chemical engineering problems
• Continuous cooling crystallization from solution : a basic model
• Convergence properties of the [alfa]-ECP method : an algorithm for solving quasi-convex MINLP problems
• Denitrifiering av rökgas : en översikt
• Development and implementation of an on-line fermentation monitoring and modeling system
• Different formulations for solving trim loss problems in a paper-converting mill with ILP
• Different strategies for solving bilinear integer non-linear programming problems with convex transformations
• Dimensioning of paper machine heat recovery recuperators
• Dynamics of the world population
• ECP - an algorithm for non-convex MINLP problems
• Empiriska modeller, regressionsanalys och försöksplanering
• En fysikalisk och experimentell genomgång av materietransportens resistanser i rör med turbulent strömning
• En fysikalisk och experimentell reflexion av flödes- och värmeresistanser i rör med turbulent strömning
• Ett övningsarbete i pumpdimensionering
• Experimental and theoretical determination of droplet-to-droplet impactions in a spray cone
• Experimental and theoretical determination of particle-to-droplet impactions in a three-phase nozzle
• Experimental design involving quantifiable variables : a case study
• Exponential and power transformations for convexifying signomial terms in MINLP problems
• Extended cutting plane algorithm
• Fabric filter fundamentals in flue-gas desulfurization
• Factorization of reaction systems applied to catalytic reactions
• Flue gas desulfurization with ammonium hydroxide : a case study
• Formulations for N-dimensional allocation problems
• Fossil fuel resources
• Fällning och separering av silikat ur svartlut
• Global optimization of mixed integer signomial programming problems
• Global optimization of pump configurations
• Hygroscopic properties of slaked lime sorbents
• Implementering av en termodynamisk simuleringsmodell för masugnar
• Improvements to an industrial glucose oxidase production process which uses Aspergillus niger
• Mathematical modeling of limestone dissolution in batch stirred tank reactors in presence of a diluted strong acid
• Measurement of hygroscopic the properties of sulfur dioxide sorbents
• Measurements and on-line modelling of key components in Aspergillus niger glucose oxidase fermentation
• Methods for dry desulfurization of flue gas
• MILLSIM, a dynamic simulation package for closed and open circuit grinding
• Minimering av energikostnader genom optimala pumpkopplingar
• Minimizing a pseudo-convex function subject to pseudo-convex constraints in the mixed integer case by the extended cutting plane method
• Mittlp : a program package for solving MINLP problems
• Model-based estimation of aerobic Saccharomyces cerevisiae fed-batch fermentation
• Modeling an electrostatic air cleaning system in the paper industry
• Modeling of web drying
• Modellering av en process för framställning av potatismospulver
• Modelling of mass transfer in extraction columns with drop forward-mixing and coalescence-redispersion
• Multi-period MINLP models for the synthesis of heat recovery systems
• Multi-product multi-purpose machine scheduling in dynamic environments
• Multivariate quantitative methods applied to spectral analysis of gaseous systems
• Mätning och simulering av frekvensfunktioner för vattendroppdiametern i en spraykon
• Några index för pumpoptimering
• On convex relaxations in nonconvex optimization
• On Hankel-optimal Laguerre methods in system approximation
• On limiting mechanisms in spray dry SO[sub 2] absorption
• On modeling and estimation of the blast furnace stack
• On modeling the atmospheric carbon dioxide change
• On sorbent activation in coolside desulfurization
• On the basics of FT-IR gas analysis
• On the modeling of flue gas desulfurization
• On using hygroscopic additives in spray dry SO[sub 2] absorption
• On-line estimation of the melting line
• On-line measurement of enzyme activity and biomass concentration with FT-IR/ATR in a cellulase producing Trichoderma reesei fermentation
• Optimal pump configurations with throttle control
• Optimization of experimental conditions for estimating parameters in a sinter reduction model
• Optimization of pump configurations as a MINLP problem
• Parallel calculation of a packed bed reactor
• Parallel optimization of computational grids for CFD
• Parameter and state estimation in blast furnace stack
• ph : the interactive pH calculator
• Physical data on adsorption coke
• Prediction of hot metal silicon in blast furnace by multivariate time series modelling
• Process identification using simultaneous heat and mass transfer
• PROSIM : ett programpaket för processimulering med grafisk koppling
• Quantitative FT-IR gas analysis, is it possible?
• Reconciliation of measurement data from the blast furnace process
• Simultaneous model structure determination and parameter estimation by MINLP
• Solving a production optimization problem in the paper industry
• Solving a two-dimensional trim-loss problem
• Solving convex MINLP optimization problems using a sequential cutting plane algorithm
• Solving mixed integer non-linear optimization problems using STOPP : a user's guide
• Solving optimal flexible pump configuration design problems by MINLP
• Solving pseudo-convex mixed integer problems by cutting plane techniques
• Solving trim-loss problems with MILP
• Some efficient formulations for simultaneous solution of trim-loss and scheduling problems in the paper-converting industry
• Some indices for optimization in pumping
• Some transformation techniques in global optimization
• Spectral subtraction as a tool for increasing measurement sensitivity : applied to quantitative FT-IR measurements of glucose and gluconate in an Aspergillus niger fermentation
• Spray dry SO[sub 2] absorption with hygroscopic additives
• Studies on Saccharomyces cerevisiae growth kinetics in biphasic batch fermentation
• Techniques in the maximum likelihood estimation of the covariance matrix
• Temperaturmätning : kursbilaga till Processindustriell mätteteknik
• The CHEEP library (CHEmical Engineering Program)
• The influence of mixing in a Aspergillus niger glucose oxidase process
• The water movement in a paper coating machine
• Torr svaveldioxidabsoption ur rökgaser med släckt kalk i textilfilter
• Transport equations for moist air when the wet bulb temperature exceeds 60° C
• Treatment of measurement data for process analysis
• Undersökning av brottmekanismer vid mineralfiberbildning
• User's guide for Alpha-ECP, version 3.0 : an interactive MINLP-solver based on the extended cutting plane method
• Utveckling och testning av procedur och försöksanläggning för mätning av torkningsegenskaper hos fasta material

inLanguage

• en
• mul
• sv

isPartOf

• Fennica

issn

• 0783-215X
• 0786-0749
• 1456-9612
• 1796-6203
• 1796-6205

name

• Rep. - Åbo Akad., Kem.-tek. fak., Inst. anl.tek., B
• Report
• Report / Department of Chemical Engineering, Process Design Laboratory : A
• Report / Åbo Akademi, Department of Chemical Engineering, Process Design Laboratory : A
• Report / Åbo Akademi, Department of Chemical Engineering, Process Design Laboratory : B
• Report / Åbo Akademi, kemisk-tekniska fakulteten, institutionen för anläggningsteknik. A
• Report / Åbo Akademi, kemisk-tekniska fakulteten, institutionen för anläggningsteknik. B
• Report / Åbo Akademi, kemisk-tekniska fakulteten, laboratoriet för anläggningsteknik. A
• Report / Åbo Akademi, tekniska fakulteten, laboratoriet för anläggningsteknik. A
• Report / Åbo Akademi. Kemisk-tekniska fakulteten. Institutionen för anläggningsteknik. A
• Report / Åbo Akademi. Kemisk-tekniska fakulteten. Institutionen för anläggningsteknik. B
• Report / Åbo Akademi. Kemisk-tekniska fakulteten. Laboratioriet för anläggningsteknik. A
• Report / Åbo Akademi. Kemisk-tekniska fakulteten. Laboratoriet för anläggningsteknik. A
• Report / Åbo Akademi. Tekniska fakulteten. Anläggningsteknik och industriell ekonomi. A
• Report /Åbo Akademi, Tekniska fakulteten, laboratoriet för anläggnings- och systemteknik. A
• Reports from the Process Design Laboratory at Åbo Akademi University : Series A
• Åbo akademi. Institutionen för anläggningsteknik. Report
• Åbo akademi. Institutionen för anläggningsteknik. Report. A
• Åbo akademi. Institutionen för anläggningsteknik. Report. B
• Åbo akademi. Kemisk-tekniska fakulteten. Institutionen för anläggningsteknik. Report
• Åbo Akademi. Kemisk-tekniska fakulteten. Institutionen för anläggningsteknik. Report. A

P60049

• <http://rdaregistry.info/termList/RDAContentType/1020>

sameAs

• <https://issn.org/resource/issn/0786-0749>
• <https://issn.org/resource/issn/1456-9612>
• <https://issn.org/resource/issn/1796-6203>
• <https://issn.org/resource/issn/1796-6205>

Instances

• 1986-1997 : Åbo Akademi
• 1986-1998 : Åbo Akademi
• 1999-2004 : Åbo Akademi
• 2006/2007 : Åbo Akademi