Tampereen teknillinen yliopisto

altLabel

• Tampere University of Technology TUT
• TTY (Tampereen teknillinen yliopisto)

created

• 2003-01-15

inScheme

• <http://urn.fi/URN:NBN:fi:au:cn:>

modified

• 2019-06-13T09:23:05

name

• Tampereen teknillinen yliopisto

narrower

• Tampereen teknillinen yliopisto. Arkkitehtuurin laboratorio.
• Tampereen teknillinen yliopisto. Arkkitehtuurin laitos
• Tampereen teknillinen yliopisto. Arkkitehtuurin osasto
• Tampereen teknillinen yliopisto. Automaatio- ja säätötekniikan laitos
• Tampereen teknillinen yliopisto. Avoin yliopisto
• Tampereen teknillinen yliopisto. Bio- ja ympäristötekniikan laitos
• Tampereen teknillinen yliopisto. Biolääketieteen tekniikan laitos
• Tampereen teknillinen yliopisto. Digitaali- ja tietokonetekniikan laitos
• Tampereen teknillinen yliopisto. Elektroniikan ja tietoliikennetekniikan laitos.
• Tampereen teknillinen yliopisto. Elektroniikan laitos
• Tampereen teknillinen yliopisto. Energia- ja prosessitekniikan laitos
• Tampereen teknillinen yliopisto. Fysiikan laitos
• Tampereen teknillinen yliopisto. Geoinformatiikan laboratorio
• Tampereen teknillinen yliopisto. Hydrauliikan ja automatiikan laitos
• Tampereen teknillinen yliopisto. Innovation Management Institute
• Tampereen teknillinen yliopisto. International Master's Programme in Business and Technology
• Tampereen teknillinen yliopisto. Konstruktiotekniikan laitos
• Tampereen teknillinen yliopisto. Kuitumateriaalitekniikan laitos
• Tampereen teknillinen yliopisto. Liikenne- ja kuljetustekniikan laitos
• Tampereen teknillinen yliopisto. Maa- ja pohjarakenteiden laitos
• Tampereen teknillinen yliopisto. Matematiikan laitos
• Tampereen teknillinen yliopisto. Materiaaliopin laitos
• Tampereen teknillinen yliopisto. Ohjelmistotekniikan laitos
• Tampereen teknillinen yliopisto. Optoelektroniikan tutkimuskeskus
• Tampereen teknillinen yliopisto. Pohja- ja maarakenteiden laboratorio
• Tampereen teknillinen yliopisto. Porin laitos
• Tampereen teknillinen yliopisto. Porin yksikkö
• Tampereen teknillinen yliopisto. Rakennetekniikan laitos
• Tampereen teknillinen yliopisto. Rakennussuunnittelun laitos
• Tampereen teknillinen yliopisto. Rakennustekniikan laboratorio
• Tampereen teknillinen yliopisto. Rakennustekniikan laitos
• Tampereen teknillinen yliopisto. Rakentamistalouden laitos
• Tampereen teknillinen yliopisto. Signaalinkäsittelyn laitos
• Tampereen teknillinen yliopisto. Systeemitekniikan laitos
• Tampereen teknillinen yliopisto. Sähkökilta
• Tampereen teknillinen yliopisto. Sähkötekniikka ja terveys-laboratorio
• Tampereen teknillinen yliopisto. Sähkövoimatekniikka
• Tampereen teknillinen yliopisto. Talouden ja rakentamisen tiedekunta
• Tampereen teknillinen yliopisto. Teknillinen mekaniikka ja optimointi
• Tampereen teknillinen yliopisto. Teknis-taloudellinen tiedekunta
• Tampereen teknillinen yliopisto. Teknisten tieteiden tiedekunta
• Tampereen teknillinen yliopisto. Tiedonhallinnan ja logistiikan laitos
• Tampereen teknillinen yliopisto. Tietoliikennetekniikan laitos
• Tampereen teknillinen yliopisto. Tietotekniikan laitos.
• Tampereen teknillinen yliopisto. Tuotantotalouden ja rakentamisen tiedekunta
• Tampereen teknillinen yliopisto. Tuotantotalouden osasto
• Tampereen teknillinen yliopisto. Tuotantotalous ja tietojohtaminen
• Tampereen teknillinen yliopisto. Tuotantotekniikan laitos
• Tampereen teknillinen yliopisto. Turvallisuustekniikan laitos
• Tampereen teknillinen yliopisto. Täydennyskoulutuskeskus
• Tampereen teknillinen yliopisto. Yhdyskuntasuunnittelun laitos
• Tampereen teknillinen yliopisto. Yliopistopalvelut

P50010

• Tampereen teknillinen yliopisto. Arkkitehtuurin laboratorio.
• Tampereen teknillinen yliopisto. Arkkitehtuurin laitos
• Tampereen teknillinen yliopisto. Arkkitehtuurin osasto
• Tampereen teknillinen yliopisto. Automaatio- ja säätötekniikan laitos
• Tampereen teknillinen yliopisto. Avoin yliopisto
• Tampereen teknillinen yliopisto. Bio- ja ympäristötekniikan laitos
• Tampereen teknillinen yliopisto. Biolääketieteen tekniikan laitos
• Tampereen teknillinen yliopisto. Digitaali- ja tietokonetekniikan laitos
• Tampereen teknillinen yliopisto. Elektroniikan ja tietoliikennetekniikan laitos.
• Tampereen teknillinen yliopisto. Elektroniikan laitos
• Tampereen teknillinen yliopisto. Energia- ja prosessitekniikan laitos
• Tampereen teknillinen yliopisto. Fysiikan laitos
• Tampereen teknillinen yliopisto. Geoinformatiikan laboratorio
• Tampereen teknillinen yliopisto. Hydrauliikan ja automatiikan laitos
• Tampereen teknillinen yliopisto. Innovation Management Institute
• Tampereen teknillinen yliopisto. International Master's Programme in Business and Technology
• Tampereen teknillinen yliopisto. Konstruktiotekniikan laitos
• Tampereen teknillinen yliopisto. Kuitumateriaalitekniikan laitos
• Tampereen teknillinen yliopisto. Liikenne- ja kuljetustekniikan laitos
• Tampereen teknillinen yliopisto. Maa- ja pohjarakenteiden laitos
• Tampereen teknillinen yliopisto. Matematiikan laitos
• Tampereen teknillinen yliopisto. Materiaaliopin laitos
• Tampereen teknillinen yliopisto. Ohjelmistotekniikan laitos
• Tampereen teknillinen yliopisto. Optoelektroniikan tutkimuskeskus
• Tampereen teknillinen yliopisto. Pohja- ja maarakenteiden laboratorio
• Tampereen teknillinen yliopisto. Porin laitos
• Tampereen teknillinen yliopisto. Porin yksikkö
• Tampereen teknillinen yliopisto. Rakennetekniikan laitos
• Tampereen teknillinen yliopisto. Rakennussuunnittelun laitos
• Tampereen teknillinen yliopisto. Rakennustekniikan laboratorio
• Tampereen teknillinen yliopisto. Rakennustekniikan laitos
• Tampereen teknillinen yliopisto. Rakentamistalouden laitos
• Tampereen teknillinen yliopisto. Signaalinkäsittelyn laitos
• Tampereen teknillinen yliopisto. Systeemitekniikan laitos
• Tampereen teknillinen yliopisto. Sähkökilta
• Tampereen teknillinen yliopisto. Sähkötekniikka ja terveys-laboratorio
• Tampereen teknillinen yliopisto. Sähkövoimatekniikka
• Tampereen teknillinen yliopisto. Talouden ja rakentamisen tiedekunta
• Tampereen teknillinen yliopisto. Teknillinen mekaniikka ja optimointi
• Tampereen teknillinen yliopisto. Teknis-taloudellinen tiedekunta
• Tampereen teknillinen yliopisto. Teknisten tieteiden tiedekunta
• Tampereen teknillinen yliopisto. Tiedonhallinnan ja logistiikan laitos
• Tampereen teknillinen yliopisto. Tietoliikennetekniikan laitos
• Tampereen teknillinen yliopisto. Tietotekniikan laitos.
• Tampereen teknillinen yliopisto. Tuotantotalouden ja rakentamisen tiedekunta
• Tampereen teknillinen yliopisto. Tuotantotalouden osasto
• Tampereen teknillinen yliopisto. Tuotantotalous ja tietojohtaminen
• Tampereen teknillinen yliopisto. Tuotantotekniikan laitos
• Tampereen teknillinen yliopisto. Turvallisuustekniikan laitos
• Tampereen teknillinen yliopisto. Täydennyskoulutuskeskus
• Tampereen teknillinen yliopisto. Yhdyskuntasuunnittelun laitos
• Tampereen teknillinen yliopisto. Yliopistopalvelut

P50012

• Tampereen teknillinen korkeakoulu

P50022

• korkeakouluopetus

P50025

• Tampere University of Technology TUT
• TTY (Tampereen teknillinen yliopisto)

P50031

• Tampere, Suomi

P50035

• Aloitti toimintansa vuonna 1965 Teknillisen korkeakoulun sivukorkeakouluna ja itsenäistyi vuonna 1972 Tampereen teknilliseksi korkeakouluksi (TTKK). Tampereen teknillisen korkeakoulun nimi muuttui Tampereen teknilliseksi yliopistoksi 1. tammikuuta 2003. Yliopisto lakkautettiin ja toiminnot siirtyvät 1.1.2019 uuteen Tampereen yliopistoon.

P50041

• Tampereen teknillinen yliopisto

P50218

• Tampereen yliopisto (2019-)

P50237

• yliopisto

prefLabel

• Tampereen teknillinen yliopisto

source

• Wikipedia, katosttu 15.3.2019 https://fi.wikipedia.org/wiki/Tampereen_teknillinen_yliopisto

Authored works

Works contributed to

• "Together we stand, divided we fall" : constructivist approach to support organizational change in the knowledge work context
• A business application architecture framework in manufacturing industry
• A feasibility study of permanent magnet generator topologies for small-scale wind power application
• A flow model for contract car manufacturing project
• A framework for analysing contracting strategies : studies on maximising paper production line life cycle profits
• A hybrid context-aware middleware for relevant information delivery in multi-role and multi-user monitoring systems :
• A hybrid model for the application of convergent ICT in process-specific health solutions
• A new approach for numerical simulation of fluid power circuits using Rosenbrock methods
• A non-recursive solution method for fixed-interval smoothing problems applied to short-term inertial navigation
• A parametric approach for efficient speech storage, flexible synthesis and voice conversion
• A typology of competitive actions
• Acoustic source localization in a room environment and at moderate distances
• Acoustic source localization utilizing reflective surfaces
• Adaptive disconnection based brain hemisphere segmentation in MRI : applications to brain asymmetry studies
• Adaptive interpolation and transform based filtering for video coding
• Additive and digital fabrication of 3D interconnects in MEMS packaging using printing technologies
• Additive manufacturing of graphene for identification and sensing applications
• Adoption of innovation : wood pellet heating system in the renewable residential energy context
• Advanced signal processing in multi-mode multi-frequency receivers for positioning applications
• Advanced tracking loop architectures for multi-frequency GNSS receiver
• Advances in antennas, design methods and analysis tools for passive UHF RFID tags
• Advances in nanoscale functionalization of stainless steel surfaces
• Aggregate-like products for civil engineering structures
• Algorithms for autonomous personal navigation systems
• Alignment of cardiac structures in [¹⁵O]H₂O perfusion PET studies
• Aloittelijasta mestariksi :
• Alpha radiation detection via radioluminescence of air
• Alumina membranes : colloidal processing and evolution of functional properties
• An application of context-sensitive computing for flexible manufacturing system optimization
• An approach to automatically distribute and access knowledge within networked embedded systems in factory automation
• An approach to incremental modelling of web services orchestration : an application to deadlock-free scheduling in automated systems
• An electrical engineering approach to the stability of MgB₂ superconductor
• An integrated methodology for modelling complex adaptive production networks
• An investment decision-making process for investments in clinical ICT systems in public health care organizations
• Anaerobic digestion of microalgae and pulp and paper biosludge
• Analysis and mitigation of I/Q imbalances in multi-antenna transmission systems
• Analysis and mitigation of oscillator impairments in modern receiver architectures
• Analysis of flexible mechanisms with finite element method
• Analysis of slipper structures in water hydraulic axial piston pumps
• Annual Report
• Annual report / Tampere University of Technology
• Antimicrobial detection illuminated : developing bioluminescent antibiotic biosensors based on bacterial gene regulatory elements
• Anturi : tamperelainen tiedeyhteisölehti
• APGM, Automated People and Goods Mover : feasibility study: case Tampere
• Apparel expert system for problem solving and learning
• Application of a semi-analytical method to model predictive control
• Application of supramolecular assemblies of perylene diimide, aluminum quinoline complex, porphyrin-C₆₀ and phthalocyanine-C₆₀ dyads in organic solar cells
• Application oriented wear testing of wear resistant steels in mining industry
• Application-specific parallel structures for discrete cosine transform and variable length decoding
• Applying urban planning and design principles into the design of mobile multimodal navigation aids
• Applying user-centred design in ERP implementation requirements analysis
• Appropriate management of on-site sanitation
• Approximate Bayesian inference methods for stochastic state space models
• Architecture for interfacing content analysis back ends
• Asiantuntijatyön suorituskyky
• Aspect-oriented approach to testing : experiences from a smartphone product family
• Aspects of critical communications in disturbance scenarios
• Aspects of radio network topology planning in cellular WCDMA
• Aspects on designing power electronic converters for photovoltaic application
• Assessment of network layouts for CDMA radio access
• Asunnottomuuden vähentämisen taloudelliset vaikutukset
• Atmospheric plasma modification in extrusion coating
• Automated cell cultivation on a well-plate
• Automatic evaluation of carotid stenosis based on computed tomography angiography
• Automatic mobile video remixing and collaborative watching systems
• Automatic sleep stage classification using electro-oculography
• Automatic transcription of pitch content in music and selected applications
• Avaimia arvonluontiin
• Avoin ammattikorkeakoulu, Avoin yliopisto, Kesäyliopisto : opetus Pirkanmaalla
• Barkhausen noise method for hardened steel surface characterization : the effect of heat treatments, thermal damages and stresses
• Benzothiazole and perylene bisimide derivatives : synthesis and opto-electronic characterization
• Bioelectrochemical recovery of energy and metals from simulated mining waters
• Biohydrogen, bioelectricity and bioalcohols from cellulosic materials
• Block-based collaborative 3-D transform domain modeling in inverse imaging
• Brain connectivity analysis with EEG
• Building 'Post-Growth' :
• Business model concept : building on resource components
• Calibration of aerosol instruments in a wide particle size range
• Capability-based adaptation of production systems in a changing environment
• Centralized architecture of the electricity distribution substation automation : benefits and possibilities
• Channel estimation and mobile phone positioning in CDMA based wireless communication systems
• Characterisation of wearable and implantable physiological measurement devices
• Characteristics of iron-based thermal sprayed coatings manufactured with high velocity oxygen fuel and high velocity air fuel spraying for wear and corrosion applications
• Characterization and biological stabilization of fine fraction from landfill mining
• Characterization and modeling of inkjet printed high frequency interconnections
• Characterization and potential use of source-separated urine
• Charge carrier dynamics in solar water oxidation
• Chasing the rainbow connection: hardness, algorithms, and bounds
• Chiral indole ligands : preparation and application in catalytic asymmetric allylic substitutions
• Circuit- and system-level design of OFDM receivers in the presence of phase noise
• Colour and texture based classification of rock images using classifier combinations
• Community managed project approach for sustainability in Ethiopia
• Comparative study of microcontroller controlled four-wire voltage and current source shunt active power filters
• Comparison of space-vector-modulated direct and indirect matrix converters in low-power applications
• Competitive advantage in networks of knowledge-intensive business services
• Compression and subjective quality assessment of 3D video
• Computational algorithms for improved synthetic aperture radar image focusing
• Computational color constancy in mobile imaging
• Computational methods for systems biology : analysis of high-throughput measurements and modeling of genetic regulatory networks
• Computational modeling of lipoprotein particles
• Computational modelling of tin oxide and its surfaces
• Computational studies of aerosol growth, formation and measurement in diesel exhaust
• Computer arithmetic on quantum-dot cellular automata nanotechnology
• Computer vision measurements for automated microrobotic paper fiber studies
• Confidence scoring of time delay based direction of arrival estimates and a generalization to difference quantities
• Confinement in the diode laser ignition of energetic materials
• Constructing and examining location-based applications and their user interfaces by applying rapid software development and structural analysis
• Contributions to medical image segmentation and signal analysis utilizing model selection methods
• Contributions to multilingual low-footprint TTS system for hand-held devices
• Contributions to positioning methods on low-cost devices
• Controlling and tuning the photoinduced electron transfer in porphyrin-fullerene dyads by chemical linkers
• Cooperative positioning in presence of human-induced perturbations
• Corrosion losses, mechanisms and protection strategies for sintered Nd-Fe-B magnets
• Cost consciousness : conceptual development from a management accounting perspective
• Cost management in firm networks
• Crafting organizational information security policies
• Critical success factors of collaboration for different types of industry convergence
• Current measurement in control and monitoring of piezoelectric actuators
• Customer integration into service innovations by developing information integration between parties and increasing customer opportunity to influence FM services
• Customisation of fashion products using complete garment technology
• Cyber-security solutions for ensuring smart grid distribution automation functions
• Damping of low frequency pressure oscillation
• Data-based modelling and analysis of coherent networked systems with applications to mobile telecommunications networks
• DC-DC converters in distributed photovoltaic electricity system : analysis, control and design
• Degradation and frost susceptibility of crushed rock aggregates used in structural layers of railway track
• Density functional studies of superatomic ligand-protected nanoclusters
• Design and development of efficient and conformal printed antennas for wireless sensing and wearable applications
• Design and implementation of a speaker-independent voice dialing system : a multi-lingual approach
• Design and implementation of parallel memory architectures
• Design and silicon area optimization of time-domain GNSS receiver baseband architectures
• Design Management of products with variability and commonality : contribution to the Design Science by elaborating the fit needed between product structure, Design process, Design goals and design organisation for improved R&D efficiency
• Design of a performance management model for wireless local area networks
• Design of hardware accelerators for embedded multimedia applications
• Design of intellectual property-based hardware blocks integrable with embedded RISC processors
• Design, analysis and generalization of polynomial predictive filters
• Design, development and in vivo evaluation of a wireless platform for intracranial pressure monitoring using inductive passive implants
• Designing globally-asynchronous locally-synchronous on-chip communication networks
• Designing modular product architecture in the new product development
• Designs for the quality of service support in low-energy wireless sensor network protocols
• Detection of incipient tree faults on high voltage covered conductor lines
• Determination of the geometric surface structure by low energy electron diffraction
• Developing a voltage-source shunt active power filter for improving power quality
• Developing and investing in senior houses in Finland : senior's preferences and investors' insights
• Developing dynamic design capabilities in software product development companies
• Developing of a quadruple model for collaborative research actions between higher education institutions and industry
• Development and characterization of test reactor with results of its application to pyrolysis kinetics of peat and biomass fuels
• Development of a situation awareness system for disturbance management of electricity networks
• Development of a UML profile for embedded system design
• Development of a vacuum-extraction based emergency response method and equipment for recovering fuel spills from underground
• Development of active noise control and voice communication systems for personal hearing protectors
• Development of high-power VECSELs for medical applications
• Development of remote handling pipe jointing tools for ITER
• Development of vehicle parapets with safe impact performance for bridges
• Diesel exhaust particles : on-road and laboratory studies
• Diffusion charging-based aerosol instrumentation : design, response characterisation and performance
• Diffusion of lipids and proteins in complex membranes
• Digitalization as a paradigm changer in machine-building industry
• Direct laser writing of proteins and synthetic photoresists for neuronal cell growth guidance
• Direct laser writing of silver nanoclusters in polymer thin films
• Direct optical measurement of fluid dynamics and dispersed phase morphology in multiphase flows
• Domain-specific template-based visual language and tools for automation industry
• Dual-mode congestion control mechanism for video services
• Dynamical profile of switched-mode converter - fact or fiction?
• E-Business Research Forum eBRF : Conference proceedings
• eBRF 2004, September 20-22, Tampere, Finland : program and abstracts
• eBRF 2005, September 26-28, Tampere, Finland : program and abstracts
• EBRF 2008 : conference proceedings
• Eco-friendliness in the brand experience of high-tech products
• Edelläkävijöiden määrittäminen seulontamenetelmän ja sisällönanalyysin avulla
• Effect of open channel filter and alternative fuels on diesel particles
• Effects of microstructural features, thermal shocks and strain rate on the mechanical response of granitic rocks
• Effects of processing parameters on P(L/D)LA 96/4 fibers and fibrous products for medical applications
• Effects of static loading and environmental conditions on the aging behavior of aluminum adhesive joints
• Efficient and robust methods for audio and video signal analysis
• Efficient VoIP support in OFDMA-based packet radio networks
• Electrical insulation materials towards nanodielectrics
• Electromagnetic design of superconducting coated conductor power cables
• Electronic intelligence development for wearable applications
• Elämänkokemusten yhteys asunnon laatukritiikkiin
• Energiatehokkuuden mittarit ja potentiaalit
• Energy efficient and cooperative solutions for next-generation wireless networks
• Energy efficient boom actuation using a digital hydraulic power management system
• Energy efficient control of hydrostatic drive transmissions :
• Energy efficient digital hydraulic power management of a multi actuator system
• Engineering coatings by laser cladding : the study of wear and corrosion properties
• Enhancement of in situ remediation of hydrocarbon contaminated soil
• Enhancing the knowledge-sharing culture in managing competitive intelligence in Latvian enterprises
• Enterprise architecture benefit realization
• Enterprise architecture in the public sector : adoption and institutionalization
• Environmental impacts of superconducting power applications
• Environmental protection standards at petrol stations : a comparative study between Finland and selected European countries
• Error detection in personal satellite navigation
• Error sources and their reduction techniques in audio power amplifiers
• Estimation algorithms for non-Gaussian state-space models with application to positioning
• Evaluation of wearable optical heart rate monitoring sensors
• Evaluation through measurements and simulations
• Evolutionary patterns in corporate political activity : insights from a historical single case study
• Exact unbiased inverse of the anscombe transformation and its Poisson-Gaussian generalization
• Experimental and numerical analysis of the hydraulic circuit of high pressure common rail diesel fuel injection system
• Experimental and numerical studies on the abrasive and impact behavior of wear resistant steels
• Experimental methods for the evaluation of lubrication conditions in gear contacts
• Experiments in innovation ecosystems
• Explaining by mechanisms : a study of organizational decline and turnaround processes
• Exploring cost system design principles : the analysis of costing system sophistication in a pricing context
• Exploring employee attachment : the case of a cross-border merger
• Exploring IT system benefits in health care
• Fabrication of sub-wavelength photonic structures by nanoimprint lithography
• Facilitating experience-based learning in groups : a method for capturing lessons learned
• Factors in active damping design to mitigate grid interactions in three-phase grid-connected photovoltaic inverters
• Fast frequency response measurement techniques in analyzing the dynamics of switched-mode power supplies
• Fate of dissolved organic matter in softwood element-chlorine-free bleached kraft mill fiberline
• Feature-based costing method for skeletal steel structures based on the process approach
• Fibres and composites for potential biomaterials applications
• Fifth International Workshop on Computational Systems Biology, WCSB 2008 : June 11-13, 2008 Leipzig, Germany
• Film-type sensor materials in measurement of physiological force and pressure variables
• Filter bank based channel equalization in broadband wireless single-carrier systems
• First-principles study of nitrogen in GaAsN : defects and interfaces
• Fostering innovation in collaboration between higher education and industry : a systemic model based on case study
• Framework for managing activity-based optimisation of order-delivery process
• Frequency conversion using ultrafast fiber lasers
• Fretting induced friction, wear and fatigue in quenched and tempered steel
• From boiler to atmosphere : effect of fuel choices on particle emissions from real-scale power plants
• From legos and logos to lambda : a hypothetical learning trajectory for computational thinking
• From minimum viable to maximum lovable : developing a user experience strategy model for software startups
• From parallel programs to customized parallel processors
• From run-time reconfigurable coarse-grain arrays to application-specific accelerator design
• GaAs-based dilute nitrides : properties and devices
• Global optimization-based deformable meshes for surface extraction from medical images
• Gold nanoparticle-chromophore systems : assembly and photophysical interactions
• Hall magnetometer for AC characterization and test results of Bi-2223 tape specimens
• Hardware accelerators for animated ray tracing
• Henkilöstötilinpäätös
• High-performance LC-VCOs and their analysis using time-varying root-locus
• Homological computations in electromagnetic modeling
• Hydrazone crosslinked polysaccharide-based hydrogels for soft tissue engineering
• Hygrothermal performance of timber-framed external walls in Finnish climatic conditions : a method for determining the sufficient water vapour resistance of the interior lining of a wall assembly
• Hyperspectral remote sensing of coastal environment
• I/Q imbalance in multiantenna systems : modeling, analysis and RF-aware digital beamforming
• Image analysis methods for the characterization of mitochondrial morphology and dynamics
• Image based analysis and modelling of Norway spruce compression
• Image database retrieval methods based on feature histograms
• Image processing for systems biology : validation and performance evaluation through simulation
• Impact of modern educational technologies on learning outcomes : application for e-learning in biomedical engineering
• Implementation of safety management in outsourced services in the manufacturing industry
• Implementations of baseband functions for digital receivers
• Implementing PLC programming training of automation engineering education in virtual environment
• Implications of profit- and risk-sharing attributes for collaboration performance in software development
• Improved quality of experience for mobile television over DVB-H broadcast channels
• Improved transform methods for low complexity, high quality video coding
• Improvements of nanofiller-elastomer systems by filler modification and tailored mixing techniques
• Improvements to online learning algorithms with applications to binary search trees
• Improving electricity distribution system state estimation with AMR-based load profiles
• Improving energy efficiency of application-specific instruction-set processors
• Improving suppliers’ position in construction project networks
• Improving the standard reliability tests for tantalum capacitors
• Increasing statistical power in brain PET studies by image analysis methods : applications for drug development
• Increasing the automation level of serial robotic manipulators with optimal design and collision-free path control
• Indoor planning in broadband cellular radio networks
• Inductively coupled passive resonance sensors :
• Inductively powered implantable system with far-field data transmitter for an intracranial pressure monitoring application :
• Integrated configuration knowledge management by configuration matrices : a framework for representing configuration knowledge
• Integration of inkjet-printing and processing into manufacturing for flexible electronics
• Intellectual capital management : understanding why Finnish companies do not apply intellectual capital management models
• Intellectual capital strategy : integrating strategic management and intellectual capital ontology
• Intelligent interpretation of machine condition data
• Intelligent resource allocation in 5G multi-radio heterogeneous networks
• Interaction of bootstrap reservoir and hydraulic pump in aircraft hydraulic systems
• Interaction phenomena between brazing alloy and diamond grits
• Investigations and real-time testing of variable speed wind turbine control during grid faults
• Investors, information arrivals, and market liquidity : empirical evidence from financial markets
• Issues in design of maximum-power-point-tracking control : power electronics perspective
• Issues in dynamic analysis and design of interconnected DC-DC power supply systems
• Issues on analysis and design of single-phase grid-connected photovoltaic inverters
• Issues on dynamic modeling and design of grid-connected three-phase VSIs in photovoltaic applications
• Iterative phase retrieval from multiple noisy observations : variational and sparse object approximation techniques
• Johtajuuden rakentuminen muutoksessa : narratiivisen merkityksellistämisen näkökulma
• Jälkimaksaminen joukkoliikenteessä
• Kasvun aika - ajankuvia tekniikan yliopistosta : 40 vuotta tiedettä ja tekniikkaa
• Knowledge agents via logic programming and fuzzy reasoning
• Knowledge-sharing challenges in company growth : a comparative case study from the software business
• Kompleksisuusteoreettinen tulkinta hallinnollisen tehokkuuden ja luovuuden yhteensovittamisesta kunnallisen päätöksenteon valmistelutyössä
• Korkeakoulujen yhteinen tutkintotavoitteinen koulutus : toiminta- ja koulutusmalli
• Large-mode-volume fiber devices for high-power and high-energy applications
• Large-scale monitoring applications in process industry
• Lecture Notes / Tampere University of Technology
• Legitimacy building in a whole supply network during its formation phase
• Light, shape and space : direct and inverse problems of individual objects and populations
• Light-activated antimicrobial materials based on perylene imides and phthalocyanines
• Liiketoimintatiedon hallinta suomalaisissa suuryrityksissä vuonna 2007
• Liiketoimintatiedon hallinta suomalaisissa suuryrityksissä vuosina 2002-2005
• Local approximations in demosaicing and deblurring of digital sensor data
• Localization and time synchronization services for resource constrained wireless sensor networks
• Logical and semantic foundations of knowledge representation for assembly and manufacturing processes
• Long-term development paths in water services : the case of Finland
• Lossless compression and nonlinear modeling of protein data
• Machine learning methods for structural brain MRIs : applications for Alzheimer’s disease and Autism spectrum disorder
• Managing and leading organizational learning and knowledge creation
• Manipulation and verification of longitudinal electric fields for nonlinear optical microscopy
• Mapping techniques for voice conversion
• Market entry and the change in rail transport market when domestic freight transport opens to competition in Finland
• Mashup ecosystems : integrating web resources on desktop and mobile devices
• Matematiikka : tieteiden kuningatar ja palvelija
• Mathematical methods for personal positioning and navigation
• Mathematical modeling and multiobjective optimization in development of low-emission industrial boilers
• Mathematical structures for dimensional reduction and equivalence classification of electromagnetic boundary value problems
• Me-rkit : konstruktivismi mainoksessa
• Measurement of intangible success factors : case studies on the design, implementation and use of measures
• Measurement of new product development performance : life cycle perspective
• Measurement of the physical properties of secondary organic aerosol particles
• Measurements of noise-seeded dynamics in nonlinear fiber optics
• Media-aware broadcasting methods for mobile television
• Melt spinning, functionalization and durability of polyetheretherketone-based fibres
• Melt-compounded composites of inorganic nanofiller and atomic-layer-deposition-coated polymer powder
• Metabolic engineering of acinetobacter baylyi ADP1 for improved growth and wax ester production using components of lignocellulosic hydrolysates as carbon sources
• Methods and models for 3D imaging in low-sensing conditions
• Methods for analysing the sensitivities of bioelectric measurements
• Methods for controlling drug release from biodegradable matrix and development of multidrug releasing materials
• Methods for image analysis, object classification and validation in biomedical microscopy applications
• Methods for light field display profiling and scalable super-multiview video coding
• Methods to enhance information extraction from microelectrode array measurements of neuronal networks
• Metrics and visualizations for managing value creation in continuous software engineering
• Microalgal cultivation and utilization in sustainable energy production
• Microstructural characteristics and corrosion properties of cold-sprayed coatings
• Microstructure based structure-property relationships for the design of thin films and composite coatings by multiscale materials modeling
• Mixture models for probabilistic analysis of genomic data
• Model processing operations for the Unified Modeling Language
• Modeling and control of microscale cell culture environments
• Modeling of charge transfer at dye-semiconductor interfaces in p-type solar cells
• Modeling of mechanical behavior of amorphous glassy polymers
• Modelling and experimental analysis of fretting fatigue in complete and bolted contacts
• Modelling and robust control of hydraulic manipulators
• Modelling of deformations and stressess in glass tempering
• Modelling of fibre orientation and fibre flocculation phenomena in paper sheet forming
• Modelling of multi-terminal VSC-HVDC links for power flows and dynamic simulations of AC/DC power networks
• Modelling stress and strain in filamentary superconductors with finite element method
• Models and methods for estimation and filtering of signal-dependent noise in imaging
• Modern digital interfaces for personal health monitoring devices
• Moderni puukaupunki : hankkeiden tuotannolliset edellytykset
• Modified thick thermal barrier coatings
• Modulation of membrane lipid receptors explored via multiscale computer simulations
• Molecular dynamics simulation studies of high density lipoprotein-like lipid droplets and related proteins
• Multi-content revelation through dialogue processes : a study in understanding the hermeneutic primary task of small groups in the context of Finland and India
• Multichannel EEG methods to improve the spatial resolution of cortical potential distribution and the signal quality of deep brain sources
• Multidimensional particle swarm optimization for machine learning
• Multidisciplinary quality characterization for the development of active and intelligent packaging technologies for muscle foods
• Multifunctional superhydrophobic nanoparticle coatings for cellulose-based substrates by liquid flame spray
• Multilingual text-to-speech system for mobile devices : development and applications
• Multimodal video analysis and modeling
• Multipath delay estimators for fading channels with applications in CDMA receivers and mobile positioning
• Multiple description coding of visual information
• Multipolar nonlinear optics of surfaces and bulk materials
• Multiscale geometric methods for isolating exercise induced morphological adaptations in the proximal femur
• Nanocrystalline functional alumina and boehmite materials : synthesis, characterization and applications
• Nanofabrication by direct writing with four-beam laser interference and nanoimprint lithography
• Nanoscale architecture for site-controlled epitaxy and antireflective coatings
• Nanostructured fiber materials and composites for tissue engineering
• Nanostructured fibre composites, and materials for air filtration
• Narrow-linewidth DFB and DBR lasers with surface gratings fabricated using UV-Nanoimprint lithography
• Natural organic matter biodegradation and microbial community dynamics in artificial groundwater recharge
• Negotiating groundwater governance :
• Network challenges of novel sources of Big Data
• Network planning aspects for 3G/4G mobile systems
• New additive manufacturing solutions and novel materials for UHF RFID tag antennas and interconnections
• New approaches to advanced stochastic volatility models and American options
• New approaches to detect breast cancer by sequential µm-area imaging
• New cost-effective method for monitoring wideband disturbances at secondary substation
• New methods for robust audio streaming in a wireless environment
• New perspectives in hyperbolic function theory
• News arrivals, jumps and variance in stock markets
• Next generation multi-system multi-frequency GNSS receivers
• Non-negative factorisation techniques for sound source separation
• Novel aspects of second-harmonic generation from thin films and surfaces
• Novel electrical aerosol instrumentation for calibration and charge measurement applications
• Novel III-V heterostructures for high efficiency solar cells :
• Novel interferometric and correlation optical imaging techniques
• Novel manufacturing methods and materials for UHF RFID tags in identification and sensing applications
• Novel methods for assessing the protection impacts of distributed generation in distribution network planning
• Novel methods for loss of mains protection
• Novel signal processing techniques for advanced wireless communications
• Novel supercontinuum sensing and imaging techniques in the infrared
• Novel water hydraulic on/off valves and tracking control method for equal coded valve system
• Numerical modelling of rock fracture in percussive drilling
• Nykytilan kartoitus ja neljä skenaariota
• O-notation in algorithm analysis
• Occurrence of pharmaceuticals in Finnish sewage treatment plants, surface waters and their elimination in drinking water treatment processes
• On adaptive Least Mean Square FIR filters : new implementations and applications
• On algorithms for two and three dimensional high throughput light microscopy
• On applicable cellular positioning for UMTS
• On design and comparison of on-chip networks
• On design and modelling of web applications outside the browser
• On increasing the automation level of heavy-duty hydraulic manipulators with condition monitoring of the hydraulic system and energy-optimised redundancy resolution
• On programmable interactions : principles, concepts and challenges of co-located and social interplay
• On simulation software and parameter estimation for biochemical models
• On the surface interaction of aerosol particles
• On the variability of the transcription process in Escherichia coli
• On thermal interaction between slab-on-ground structures and subsoil in Finland
• On-line reconfigurable extended generalized fat tree network-on-chip for multiprocessor system-on-chip circuits
• Operations on finite sets, functional composition, and ordered sets
• Opinto-opas : laitokset ja opintojaksot / Tampereen teknillinen yliopisto
• Optical pulse generation with semiconductor disk lasers
• Optical second-harmonic generation from metal nanostructures
• Optically-pumped semiconductor disk lasers for generating visible and infrared radiation
• Optics Days 2010 : proceedings : 6-7 May 2010, Tampere University of Technology, Tampere
• Optimization in the final disposal of spent nuclear fuel
• Optimization of ESD protection methods in electronics assembly based on process and product specific risks
• Optimization of fin arrays cooled by forced or natural convection
• Optimization of office building frame with semi-rigid joints in normal and fire conditions
• Organisaation arvot ja liiketoiminnan tulos : joustava kyvykkyys talotekniikka-alalla
• Organisational and cross-organisational identity management
• Organoboron compounds : substrates for Suzuki-Miyaura cross-coupling and asymmetric conjugate addition
• Osaamisen ja tietämyksen hallinta suomalaisissa suuryrityksissä
• Output power variation and mismatch losses of photovoltaic power generators caused by moving clouds
• Oxidation and control of iron in bioleaching solutions
• Parallel memory architectures for video coding
• Parametric transforms based adaptive methods in signal processing and logic design
• Parathyroid scintigraphy : optimization of 99mTc-sestamibi/123I subtraction SPECT/CT
• Particle and NOₓ emissions from a HVO-fueled diesel engine
• Pattern language approach
• Pattern-based tool support for frameworks towards architecture-oriented software development environment
• Perceptual approaches in image and video analysis
• Perceptually optimized visualization on autostereoscopic 3D displays
• Performance analysis, resource allocation and optimization of cooperative communication systems under generalized fading channels
• Performance and reliability of polymer-based sensor packages at high temperatures
• Performance evaluation of communication protocols for cooperative road safety applications
• Performance extension and evaluation of vehicular Ad-hoc networks
• Performance measurement for managing welfare services
• Photoactive ZnO-organic nanostructures : development and characterization
• Photodynamics of energy and electron transfers in solid films of porphyrin, phthalocyanine, and perylene diimide derivatives
• Photopolymerizable liquid fullerene, phthalocyanine and porphyrin derivatives : synthesis, analysis and photocurrent generation
• Physical characterization of diesel exhaust nucleation mode particles
• Physical layer challenges and solutions in seamless positioning via GNSS, cellular and WLAN systems
• Pientalojen mikrobivauriot : lähtökohtana asukkaiden kokemat terveyshaitat
• Pienyrittäjän osaaminen kilpailuareenalla
• Plastic deformation of amorphous aluminium oxide :
• Pointwise shape-adaptive DCT image filtering and signal-dependent noise estimation
• Power and energy aware heterogeneous computing platform
• Precordial bipolar leads for mobile ECG applications
• Principles and techniques to systematically define, analyze, and develop remote maintenance tasks for machines operating in ionizing radiation environments
• Printed supercapacitors for energy harvesting applications
• Proceedings of EBRF
• Process integration approaches to improve the techno-economic feasibility of torrefaction process
• Product configuration in projecting company : the meeting of configurable product families and sales-delivery process
• Production of nanomaterials by pulsed laser ablation
• Production system assessment and improvement : a tool for make-to-order and assemble-to-order companies
• Program code compression on single- and multi-core embedded systems
• Program compression in long instruction word : application-specific instruction-set processors
• Programmable receiver architectures for multimode mobile terminals
• Project management ontology : the organizational learning perspective
• Propagation of carbonation induced reinforcement corrosion in existing concrete facades exposed to the Finnish climate
• Properties of alloy 625 claddings made with laser and CMT methods
• Prototyping interactions
• Public service or public investment? : an assessment of the consequences of new public management in the water sector
• Pulsation analysis of paper making processes
• Pulsed laser spectroscopy : bioaerosol fluorescence and gas-phase photoacoustics
• Puukerrostalojen rakentamisen esteet ja mahdollisuudet : keskeisten suomalaisten rakentamis- ja kiinteistöalan sidosryhmien vertaileva asennemittaus
• Puurakenteisen salibandyhallin suunnittelu- ja rakentamisopas
• Quality driven scheduling in construction
• Quantification of biomedical data with stochastic parametric models and numerical optimization
• Quantitative tree reconstruction from terrestrial laser scanning data and applications
• Quantum Cuts : A Quantum Mechanical Spectral Graph partitioning method for salient object detection
• Quenching and partitioning of high-aluminum steels
• Rajapinta : sidosryhmälehti
• Rakennusalan liiketoimintatiedon hallinnan opas
• Rakennusvalvonta digitaalisen muutoksen pyörteessä
• Rate adaptation in media streaming
• Real estate development externalities : impacts on housing prices and socio-economic segregation
• Reduced-complexity digital predistortion in flexible radio spectrum access
• Relevance of laboratory wear experiments for the evaluation of in-service performance of materials
• Reliability of SnAgCu solder joints under thermo-mechanical stresses
• Removal of the natural organic matter in the different stages of the drinking water treatment process
• Report / Tampere University of Technology, Department of Industrial Engineering and Management
• Research tools and architectural considerations for future GNSS receivers
• RF-repeater performance assessment and planning guidelines for WCDMA networks
• Rheological characterization of magnetorheological fluids
• Rich & orderly : the role of visual complexity and order in intuitive preference for apartment interiors
• Robotic micromanipulation and microassembly : modelling and practices
• Robust face recognition under uncontrolled environments
• Robust regulation for infinite-dimensional systems and signals in the frequency domain
• Robust signal processing methods for genomic time series and protein accessibility data
• Role of intellectual capital in company growth : a case study on technology companies in Finland
• Role of municipalities in water services
• Safe operation of nuclear power plants : is safety culture an adequate management method?
• Safety management system in air navigation services and airport operations
• Safety of the integrated navigation system of a ship in fault situations
• Sampling and measurement methods for diesel exhaust aerosol
• Scalable multiprocessor system-on-chip architecture design on FPGA
• Scaling approaches to quantum many-body problems
• Scenario-driven development of service-oriented systems
• Selected topics of mobile multimedia communication services
• Self-interference modeling, digital cancellation, and system studies
• Self-localization in ad hoc indoor acoustic networks
• Selvityksiä ja raportteja / Vaasan yliopiaston julkaisuja = Reports
• Selvitys Pirkanmaan puhdistamolietteiden ja biojätteiden ravinteista ja niiden potentiaalisesta käytöstä maa- ja metsätaloudessa sekä viherrakentamisessa
• Semiconductor mirrors for ultrafast fiber technology
• Sequential detection applied to line-scan gray level defect imaging
• Series active power filter in power conditioning
• Service availability standards for carrier-grade platforms : creation and deployment in mobile networks
• Shape and gray level descriptors for surface defect image retrieval and classification
• Short pulse lasers using advanced fiber technology and saturable absorbers
• Signal classification using novel pattern recognition methods and wavelet transforms
• Signal processing methods and information approach to systems biology
• Signal processing methods for drum transcription and music structure analysis
• Signals of opportunity for positioning purposes
• Simulating atomic processes in non-contact atomic force microscopy
• Simulation tool development for quench modelling :
• Singing voice recognition for music information retrieval
• Single- and dual-frequency laser diodes based on surface gratings
• Situation report bulletin
• Social networking services on mobile devices : user interface designs and user experience studies
• Social, private, and trusted wearable technology under cloud-aided intermittent wireless connectivity
• Software defined radio solutions for wireless communications systems
• Soil-structure interaction of long jointless bridges with integral abutments
• Soliton-assisted random lasing in nematic liquid crystals
• Solutions for large-scale content delivery over the Internet protocol
• Some methods to improve life cycle manageability of low-volume mobile processing platforms
• Spatiotemporal power of positron emission tomography :
• Stability-guaranteed nonlinear model-based control of hydraulic robotic manipulators
• State space output regulation theory for infinite-dimensional linear systems and bounded uniformly continuous exogenous signals
• Statistical and information theoretic approaches to model selection and averaging
• Statistical reconstruction methods for 3D imaging of biological samples with electron microscopy
• Statistical WVTR models for extrusion-coated webs in various atmospheric conditions
• Statistics / Tampere University of Technology
• Stochastic modeling and analysis of time evolution for biochemical systems
• Strain rate history effects in a metastable austenitic stainless steel
• Strategic management of high growth ventures : a venture-to-capital framework for professional entrepreneurship
• Structured ZnO and Al2O3/Ag surfaces : antibacteriality, photocatalytic activity and durability
• Studies of content-mediated interaction :
• Studies of inkjet printing technology with focus on electronic materials
• Studies on diffractive mobile display backlights
• Studies on location technology standards evolution in wireless networks
• Studies on multi-device usage practices and interaction methods
• Studies on sensor aided positioning and context awareness
• Studies towards utilizing passive UHF RFID technology in paper reel supply chains
• Study of oxy-fuel combustion of single coal char particles : experimental and modelling
• Sub-100 ps light sources based on Q-switched microchip lasers
• Super-resolution image reconstruction using non-linear filtering techniques
• Supercapacitors on flexible substrates for energy autonomous electronics
• Supporting agile transformation with defect management in large distributed software development organisation
• Supramolecular materials for photocontrolled optical nonlinearity
• Surrogate model algorithms for computationally expensive black-box global optimization problems
• Synergy management by hybrid innovation
• Synthesis and function of photoactive donor-acceptor systems of bay-functionalized perylene diimide dyes in view of 1,7- and 1,6-regioisomers
• Synthesis of nanoparticles and preparation of deposits by Liquid flame spray
• Synthesis of TiO2 by various methods : structural characteristics, photocatalytic activity and usability of powders and coatings
• System level design issues in low-power wireless sensor networks
• System level performance evaluation of distributed embedded systems
• Systematic approach for the development of remote handling system concepts for high energy physics research facilities
• Systematic methods for designing stride permutation interconnections
• Sähkön ja kaukolämmön hiilineutraali visio vuodelle 2050
• Tampereen alueen korkeakouluista vuonna 2003 valmistuneiden työelämääm sijoittuminen ja työmarkkinaliikkuvuus viisi vuotta valmistumisen jälkeen
• Tampereen teknillinen yliopisto ja Co
• Tampereen teknillinen yliopisto. Rakennustekniikan laboratorio. Rakennetekniikka. Tutkimusraportti
• TCP performance evaluation over wired and wired-cum-wireless networks
• Techniques for implementing concurrent exceptions in C++
• Techniques for spectral voice conversion
• Technological and architectural enablers for direct device connectivity in LTE cellular networks
• Technologies enabling smart homes
• Technologies for smart environments : capacitive user tracking and proactive fuzzy control
• Technology development and techno-economic analysis of hydrogen production by thermal decomposition of methane
• Tekhne : TTY:n sidosryhmälehti
• Temperature dependence of the transcription dynamics of synthetic genes in Escherichia coli
• Terveysjärjestelmän johtamisen tietovirrat
• Text-to-phoneme mapping using neural networks
• Textural features in medical magnetic resonance image analysis of the brain and thigh muscles
• The development and microbiology of bioprocesses for the production of hydrogen and ethanol by dark fermentation
• The effect of an applied electric current on cell proliferation, viability, morphology, adhesion, and stem cell differentiation
• The effect of compression and sliding movement on the wear resistance of steels and crushing work in mineral crushing
• The effect of rock properties on the high stress abrasive wear behavior of steels, hardmetals and white cast irons
• The effects of customization on capital goods manufacturig business
• The Finnish occupational accidents and diseases statistics database employed for safety promotion
• The First Finnish Mass Customization and Personalization (MCP) Forum : facing international research
• The influence of tissue conductivity and head geometry on EEG measurement sensitivity distributions
• The management of occupational health and safety : managers' perceptions of the challenges, necessary support and organisational measures to support managers
• The performance, kinetics and microbiology of sulfidogenic fluidized-bed reactors treating acidic metal- and sulfate-containing wastewater
• The role of inorganics in biomass gasification : catalytic effects on char reactions and toxic emissions
• The role of nucleoid exclusion in the intracellular spatial organization of escherichia coli
• Thermal load analysis and monitoring of doubly-fed wind power converters in low wind speed conditions
• Thermally sprayed Cr3C2-NiCr coatings - improving the abrasion resistance
• Three D component method based on the rakes
• Three-dimensional (3D) digital breast tomosynthesis (DBT) in the early diagnosis and detection of breast cancer
• Tietointensiivinen palvelutoiminta : näkökulmina kompleksisuus ja tiedonhallinta
• Tietokoneet perusopetuksen opettajan arkipäivässä : opettajien työhyvinvoinnin, työuupumuksen ja koulun tietostrategioiden vaikutukset teknologia-asenteeseen
• Tietotekniikan soveltaminen Maankäyttö- ja rakennuslain kaavojen toteutuksen ohjelmointiin
• Tietämyksenhallinnan käytännöt pirkanmaalaisissa pk-yrityksissä
• Tilannekatsaus
• Time-interleaved analog-to-digital-converters : modeling, blind identification and digital correction of frequency response mismatches
• Towards assessment driven software process modeling
• Towards in situ methods for characterization of porous materials
• Towards retinal repair : bioelectric assessment of retinal pigment epithelium in vitro and electrode materials for retinal implants
• Towards robust local descriptors for texture classification
• Tracheal sound analysis of sleep disordered breathing
• TTY:n tohtorikoulun seminaari 2006 : TUT Graduate School Seminar 2006
• Tubular truss optimization using heuristic algorithms
• Ultrafast capture and relaxation of carriers in InGaAs semiconductor quantum well nanostructures
• Ultrafast fiber lasers using novel semiconductor saturable absorbers and photonic-crystal dispersion compensators
• Ultrafast ytterbium fiber sources based on SESAM technology
• Understanding and supporting knowledge sharing in software engineering
• Understanding roles and user experience of mobile technology in co-located interaction
• Undrained shear strength of Finnish clays for stability analyses of embankments
• User expectations and experiences of mobileaugmented reality services
• User-level reliability and quality monitoring in satellite-based personal navigation
• Utilization of food waste via anaerobic digestion: from feedstock to biogas and fertilizers
• Utilization of models for online estimation in combustion applications
• Various factors of pressure-driven entry of soil gas into a detached house through concrete foundation :
• Vector quantization techniques for approximate nearest neighbor search on large-scale datasets
• Venture-to-Capital : a new framework for growth venturing and professional ownership
• Vision-based macro-micro mobile manipulation
• Visualizing music collections based on metadata : concepts, user studies and design implications
• Weak signal acquisition in satellite positioning
• Wearable passive RFID tags in advanced applications :
• Website performance evaluation and estimation in an E-business environment
• Wet spinning of polylactide stereo copolymer multifilaments
• Wetting and reactivity between nitride ceramics and molten copper and silver alloys
• Where infrastructures, architectures, and processes of software engineering meet
• Whole-body electric bioimpedance measurement in the evaluation of vascular function
• Wood quality and geometry measurements based on cross section images
• XML-based framework for representation of decision diagrams
• ‘Don’t fix it if it ain’t broke’ :

Works about Tampereen teknillinen yliopisto

• Kasvun aika - ajankuvia tekniikan yliopistosta : 40 vuotta tiedettä ja tekniikkaa
• Korkeakoulusektorin rakenteellisen kehittämisen kotouttaminen : vertaileva tapaustutkimus : loppuraportti
• Ohjaus opintojen edistäjänä? : Tampereen teknillisen yliopiston opiskelijoiden kokemuksia opintojen etenemisen esteistä, opintojen ohjauksesta ja yliopistoon integroitumisesta
• Opetuksen ja oppimisen laadun mittaaminen
• Opiskelun mielekkyys Tampereen teknillisellä yliopistolla
• Selvitys ohjelmistotekniikan opetuksesta ja sen kehitystarpeista Tampereen teknillisellä yliopistolla
• Tampereen teknillisen yliopiston auditointi 2014
• Tampereen teknillisen yliopiston historia 1965-2015
• Tampereen teknillisen yliopiston laadunvarmistusjärjestelmän auditointi
• Tampereen yliopiston ja Tampereen teknillisen yliopiston virtuaaliyliopistojen arviointi
• Tietoyhteiskunnan työelämän mahdollisuudet ja haasteet : avauksia tutkimuksen, opetuksen ja palvelutoiminnan kehittämiseen : esiselvitys